Numerical Analysis of Discrete Nonlinear Fracture Mechanics
Because cementitious materials tend to fail by fracture along discrete interfaces, it makes sense to analyze this behavior with discrete nonlinear fracture mechanics. Using the finite...
Computational Framework for 3D Nonlinear Discrete Crack Analysis
Under contract from the Electric Power Research Institute (EPRI) to investigate the applicability of fracture mechanics to concrete dams, the authors are involved in the development of...
Frequency Response of Disordered Periodic Structures
A computational procedure is given for calculating the frequency response of disordered periodic structures based on wave propagation theory. An ideal periodic structure is composed of...
Random Response of Multicrystalline Structures
An approach to the probabilistic modelling and analysis of multicrystalline microfabricated beams is presented with application to micro-electro-mechanical systems (MEMS). Random, textured...
Stochastic Mixed Finite Difference Method
Some aspects of numerical solutions of stochastic mechanics problems are considered. The Finite Difference method for discretization of stochastic continuous media problems is discussed....
Full Scale Application of Active Bracing Systems
A full scale active bracing system has been installed in a structure in Tokyo, Japan. The practical problems associated with the implementation of this system, and the corresponding solutions...
Recent Findings in Active Structural Control
Over the past decade, tremendous advancements have been made in the development of structural control paradigms and in the necessary supporting technologies. The fundamental paradigm that...
Structural Control Under Stochastic Seismic Loads
This paper presents a method of controlling nonlinear and hysteretic civil engineering structures subjected to stochastic earthquake ground excitations. Emphasis is placed on control of...
Pressure Losses Across Sequential Stenoses in Collapsible Tubing
The fluid dynamics of a model of a diseased artery with multiple stenoses were investigated in a recirculating steady-flow system over a range of Reynolds numbers (Re) from 30 to 1100....
Pulmonary Artery Velocity Profiles in Young Lambs
This report describes progress made in our laboratory in examining pulmonary artery velocity patterns in normally maturing lambs. Lambs from four age groups were selected for study--2...
Flow in a Model Symmetric Bifurcation
Flow through bifurcations is of particular interst to the field of hemodynamics and respiration dynamics. In this paper flow through a model symmetric bifurcation is studied experimentally...
Fluid Dynamics at the Carotid Bifurcation
Arterial wall distensibility is believed to be of secondary importance to the general flowfield of the human carotid artery. However, it has been reported that it may have greater influence...
Lumped Parameter Model for the Dynamics of the Pulmonary Circulation
The pulmonary circulation is a low pressure system such that respiration has an important effect on pulmonary hemodynamics and has to be taken into account when predicting its behavior....
A Cumulative Failure Criterion of Concrete Under Uniaxial Dynamic Compressive Loading
It has been previously reported that the strength and critical strain of concrete under impact increase with strain rate, but neither of them can predict failure. A cumulative damage parameter...
Reduced Basis Technique for Nonlinear Vibrations of Composite Panels
A reduced basis technique and a computational procedure are developed for the nonlinear free vibrations of composite panels. The computational procedure can be conveniently divided into...
A Discussion of the Numerical Modeling of Sea Ice Ridging
Pressure ridging, is the failure mechanism of the Arctic pack ice in compression. The large-scale compressive strength of the ice pack is determined by the aggregate of ridge building...
Erosion of Steep River Banks and Time Evolution Towards Equilibrium Channel Shape
A numerical analysis of the time evolution of straight river channels is presented. The bed and bank, material is taken to be coarse, non-cohesive and uniform in size. As a result of the...
Stability of Systems of Rigid Bodies by Bounding Theorems
The stability of systems of systems of rigid bodies subjected to conservative and dissipative forces is investigated by considering the minimization of a work function subject to the kinematic...
Predicting the Performance Limits of Soil-Culvert Systems
A finite element model for elastic plastic large deformation analysis of soil-culvert systems is presented. Predictions of this numerical model are in good agreement with failure tests...
Finite Element Large Deflection Analysis of Cylindrical Shells with Different Types of Cutouts
Nonlinear finite element is used to find the elastic buckling load and the maximum deflection for cylindrical shells subjected to unsymmetrical pressures due to wind. These shells are...
Return to search