Probability of Bridge Failure Due to Pier Scour
Methods have been presented for computing the probability of bridge failure due to pier scour either using a maximum scour depth model or a time-dependent model. The probability of failure...
Design Criteria and Specifications for Pipeline Rehabilitation Projects
Pipeline rehabilitation, while not a completely new technology, is nevertheless a fairly recent development, just now coming to the forefront as to common usage. It is not however a fail-safe...
Design of Municipal Wastewater Treatment Plants
This manual,
International Air Transportation
A New International Airport
This proceedings,
Seattle Swings Again
The 1992 Outstanding Civil Engineering Achievement Award went to a bridge that the experts said couldn't be built�a concrete segmental box girder swing bridge with twin leaves...
Building Better Bridges: Concrete Vs. Steel
The authors debate the merits of concrete segmental and steel bridge design and construction based on five criteria: initial and life-cycle costs; structural advantages; durability; construction...
Design-Build Goes Public
Public owners of civil works get paid to avoid risk. It's their job. Why try some experimental technique for building offices when safe, proven methods exist? But times have...
Successful High Traffic Chip Seal Construction
Chip seal coats are used to extend pavement service life by reducing water and air infiltration and improving skid resistance. Application of chip seals is usually limited to low-traffic...
Implementation of Material Requirements in Specifications
This paper focuses on where to find information on materials, their compatibility, minimum standards and specifying of materials and their use. The paper also presents case histories on...
Performance of Free Draining Base Course at Fort Campbell, Kentucky
In 1990 a free draining base course layer was constructed in the structural section of a pavement to be used as a military vehicle maintenance yard at Port Campbell, Kentucky. The Corps...
Reliability-Based Design for Feeeze-Thaw Concrete
Observation of pavements in Iowa shows results from the test for freezing and thawing of concrete, ASTM C-666, is not always consistent with field performance. Similar concrete made with...
Adhesives and Structural Plastics
An overview of some primary considerations for the use of adhesives and their advantages in connection of structural plastics is presented. Effective joint geometries, surface preparations,...
Behavior of Externally Confined Concrete Columns
This paper investigates the feasibility of strengthening of seismically deficient concrete columns with high-strength fiber composite straps. The concrete columns will be externally confined...
Embankment Dams
James L. Sherard Contributions
This volume is dedicated to the memory of Dr. James L. Sherard, who made many contributions to embankment dam engineering. Twenty-one of his papers related to this topic were selected...
The Crown and the Curtain Wall
Crowning the complex curtainwall of an 870 ft concrete tower with a 150 ft high crown of aluminum masts in concentric rings above the 60th floor required ingenuity and extraordinary cooperation...
Seismic Hazards in the Eastern U.S. and the Impact on Transportation Lifelines
In the eastern US seismicity is low, hazard is moderate, and risk is quite high, especially in metropolitan regions with vulnerable transportation systems typically not designed to resist...
Evaluation of Seismic Vulnerability of Highway Bridges in the Eastern United States
For high risk seismic zones such as California, the state-of-the-art in earthquake resistant design for new highway bridges has been well advanced, especially since the damaging 1971 San...
Seismic Pile-Group?Structure Interaction
A detailed multi-step procedure is outlined for a complete seismic soil-pile-foundation-structure interaction analysis, within the format of kinematic-inertial decomposition. Newly-developed...
Cone Models for a Pile Foundation
A single pile in a soil halfspace is modeled for dynamic excitation with disks and their corresponding double cones. This simple one-dimensional strength-of-materials approach provides...
The Superposition Approach to Pile Group Dynamics
A general three-dimensional boundary integral formulation for pile groups is used to obtain a set of dynamic interaction factors for a number of soil profiles and for a wide range of pile...
Return to search