Buckling of Thin-Walled Members by p-Version of FEM
P-Version of the finite element method (FEM) is used for one-D and three-D modeling of thin-walled open sections and axial compressive load. Equal angle and channel sections are used for...
Practical Analysis of Flexibly-Connected Building Frames
Modeling of flexible connection behavior as elastic-perfectly plastic is proposed for analysis of building frames, and results based on this idealization are compared with fully non-linear...
Centrally Loaded Columns
The paper has given a detailed description of the chapter on centrally loaded columns that will appear in the 4th Edition of the Structural Stability Research Council 'Guide...
Beam-Columns
The Fourth Edition of the SSRC Guide presents a state-of-the-art information on beam-columns for use by specification writers, researchers, and designers. The present paper is an extremely...
Frame Stability
The Chapter on Frame Stability of the Fourth Edition of the SSRC Guide provides guidance on use of several stability design procedures. These include Critical Load Concept, Second-Order...
Effect of Connector Spacing on Double Angle Compressive Strength
The 1986 AISC 'Load and Resistance Factor Design (LRFD) Specification for Structural Steel Buildings' includes new rules affecting the design of built-up members...
Reliability-oriented Design of Fatigue Experiments
It is well known in the reliability analysis for structural components subjected to cyclic random load that apart from the usually model parameters uncertainties are most important and...
Reliability Revision for Structures in Service
Models of structural reliability are called upon to provide not only initial estimates of safety, but also revised estimates reflecting new information on the structure as it becomes available....
Aluminum Orthotropic Bridge Deck Verification
This paper reports tests conducted to evaluate an aluminum orthotropic deck. Approximately 60 welded T-joints with 6061-T6 stems and 5456-H321 plate were subjected to flexural fatigue...
Fatigue Design Criteria for Welded Steel Details
A review of fatigue data and reassessment of the 1983 fatigue specification resistance functions has been conducted. Since the AASHTO specification fatigue resistance provisions were introduced...
Base Isolation for Reinforced Concrete Structures
A recent experimental program has been carried out at the Earthquake Simulator Laboratory of the Earthquake Engineering Research Center in which a 1/5th scale reinforced concrete structural...
Structural Considerations of Cellular Concrete
Although not normally considered to be a structural material, cellular concrete possesses characteristics which may result in its having structural applications in building and structural...
Large Reinforced Concrete Active Reclaim Silos
The design and construction of large reinforced concrete shell silos used to provide economical short-term protected storage for coal and lignite in the active reclaim systems of power...
The Ultimate Load Design Method of R/C and P/C Shell
Based on the testing results of 20 full size shells and models, the ultimate load analysis method is proposed to design four different kinds of reinforced concrete shallow shell structures....
Substitute Wind Concept for Elastic Stability of Cooling Tower Shells
The influence of the nonaxisymmetric wind distribution on the stability behavior of cooling tower shells is examined. It is demonstrated, considering about 50 cooling tower shells, that...
Applied P-Delta Methods in the Design Office
At first glance some axioms of a P-Delta analysis appear to be paradoxical. First, the P-Delta effects are a direct function of the depth of the structure parallel to the wind direction....
Frame Stability - A Canadian Designer's Approach
The deficiencies and fallacies of the simplistic effective column length approach to frame stability are demonstrated through its application to a 57-story rigidly framed building structure....
Role of Microcompiuters in Highway Weigh-in-Motion Systems
Microcomputer technology makes it possible to digitize the signals, calculate the desired factors, and record and display the information in real time at the weigh-in-motion (WIM) site....
Materials and Member Behavior
Each of the papers in this book covers some aspect of material properties. New developments in cold formed steel are reviewed. The strength, stiffness, and ductility of steel connections...
Dynamics of Structures
This volume includes the papers presented at the 6th Structures Congress of ASCE which deal with the analysis, design, and behavior of civil engineering structures and facilities subjected...
Return to search