ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

The Effect of Compaction on Buried Flexible Pipes
This contribution presents an analysis of the installation of flexible pipes in granular soil. The deformation of the pipe cross section is measured in field and laboratory tests. It is...

Field Experiment on Behavior of Continuous Water Main with a Miter Bend
A field experiment was conducted to investigate behaviors of a buried continuous steel water main with a 90-degree miter bend subjected to internal pressure and ground settlement. Deformations...

The Next Earthquake
The California's October 1989 Loma Prieta earthquake confirmed must of the current research and practice about structural engineering and seismic events. It also highlighted...

Incorporating Seismotectonic Data into Seismic Hazard Analyses
A wide range of seismotectonic data are now being incorporated into probabilistic seismic hazard analyses, supplementing the inadequately short historical seismicity record. This paper...

Kinematic Models of Extensional Structures: Seismic Implications
Kinematic models can relate faults of different types and different positions within a single dynamic system and thereby offer the potential to explain the disparate seismic activity characteristic...

Approach to Developing a Ground-Motion Design Basis for Facilities Important to Safety at Yucca Mountain
The DOE has proposed a methodology for developing a ground-motion design basis for prospective facilities at Yucca Mountain that are important to safety. The methdology utilizes a quasi-deterministic...

A Proposed Methodology for Validating Performance Assessment Models for the DOE Office of Civilian Radioactive Waste Management Program
The Department of Energy (DOE) has developed a draft methodology for validating performance assessment models that will be used in the licensing of high-level waste repository systems....

Preclosure Safety Analysis for a Prospective Yucca Mountain Conceptual Design Repository
A preliminary probabilistic risk assessment was performed for the prospective Yucca Mountain conceptual design repository. A new methodology to quantify radioactive source terms was developed...

Container Material Selection, Modeling and Testing
Virtually all of the approximately 40,000 high-level nuclear wast containers to be emplaced at Yucca Mountain must remain intact for 1,000 years to satisfy Nuclear Regulatory Commission...

MIIT; International In-Situ Testing of Simulated HLW Forms?Preliminary Analyses of SRL 165/TDS Waste Glass and Metal Systems
The first in-situ tests involving burial of simulated high-level waste (HLW) forms conducted in the United States were started on July 22, 1986. This effort, called the Materials Interface...

Permeability and Dispersivity of Variable-Aperture Fracture Systems
A number of recent experiments have pointed out the need of including the effects of aperture variation within each fracture in predicting flow and transport properties of fractured media....

A Description and Status of the Yucca Mountain Project Repository Sealing Program
Yucca Mountain is being characterized to determine its suitability as a site for a high-level nuclear waste repository. The repository would be located in the unsaturated zone in fractured,...

Prototype Testing for the Yucca Mountain Project
The U.S. Department of Energy, through its Yucca Mountain Project Office (YMPO), has been conducting prototype activities in welded and non-welded tuff. These activities are in preparation...

Concepts in Prototype Testing for In Situ Geomechanical Investigations at Yucca Mountain
Geomechanical investigations comprise a significant portion of the site characterization program to be conducted at Yucca Mountain, the site of a proposed repository for nuclear waste....

Prototype Heater Test of the Environment Around a Simulated Waste Package
This paper presents selected results obtained during the 301 day duration of the Prototype Engineered Barrier System Field Test (PEBSFT) performed in G-Tunnel within the Nevada Test Site....

The Application of Vertical Seismic Profiling and Cross-Hole Tomographic Imaging for Fracture Characterization at Yucca Mountain
In order to obtain the necessary characterization for the storage of nuclear waste, much higher resolution of the features likely to affect the transport of radionuclides will be required...

Seismic Characterization of Fracture Properties
Laboratory measurements of the mechanical stiffness, hydraulic conductivity and seismic properties of three natural fractures were made as a function of applied normal stress. Seismic...

Local Economic Impact Assessment of the Nevada Test Site: A Methodological Prelude to Socioeconomic Assessment of the Proposed Yucca Mountain High-Level Radioactive Waste Repository
The economic impact of the high level of nuclear repository can be approximated by studying the economic effects of the Nevada Test Site. Using the UNLV Nevada models, we estimated the...

Accident Analyses in Fulfillment of the Requirements of the National Environmental Policy Act and Their Relationship to the Packaging and Testing Requirements of the Nuclear Regulatory Commission
In planning its Transportation Program, the Office of Civilian Radioactive Waste Management must address two fundamental questions: (1) To what extent are the reasonably foreseeable significant...

The Source Term for HLW Disposal in the European Communities' R&D Programme
During the last five years, the EC's research programme on radioactive waste has focused much of its investigation in the field of HLW management on the source term for geologic...

 

 

 

 

Return to search