Stochastic Responses of Lifeline Systems Under Seismic Excitations
A wave superposition model is proposed to predict the field motion on the basis of the seismic records obtained from a strong motion array. By assuming the ground motion to be a homogeneous...
Seismic Analysis and Design of RC Lifelines
This paper describes the general approach for analyzing a soil-reinforced concrete lifeline system subjected to seismic loading, and the development and importance of transfer functions...
Elevated Water Tank Inelastic Seismic Analysis
In 1988, the Seattle Water Department hired CYGNA, a consulting firm, to assess the seismic reliability of their water system, since major earthquakes can occur in the area. Their study...
Collapse of the Cypress Street Viaduct
This paper is being presented by the Division of Structures, Post EarthQuake Investigation Team (PEQIT) on the collapse of the Cypress Street Viaduct in the City of Oakland, California,...
Lateral Load Test on Driven Pile Footings
The October 17, 1989 Loma Prieta earthquake provided an ideal time and situation to perform for the first time, at no installation cost, a full scale lateral load test on a group of driven...
Case History of the Point Roberts Marina
This paper presents a fifteen year history of the design performance of the Point Roberts Marina. The 1,000 berth small craft harbor is located on the Strait of Georgia, immediately north...
Load Sharing Benefits of Composite Pile Systems
The paper develops design techniques which will allow piled systems to be extended into more onerous operating conditions. In storm events marinas always develop failure mechanisms at...
Design Experience Gained Through Physical Modeling of Small-Craft Harbors
A research work unit has been initiated to determine the state-of-knowledge of small boat harbor design. Existing design criteria for small-craft harbor design is based primarily on 'rule-of-thumb'...
Predicting Sedimentation in Shallow Draft Coastal Ports
The U.S. Army Engineer Waterways Experiment Station is conducting a study to develop and improve design guidance for shallow draft coastal ports. As part of this effort and to fill gaps...
A Case Study of Propeller-Induced Currents and Sediment Transport in a Small Harbor
The operation of vessels in marinas and small harbors can provide important driving forces affecting ambient circulation patterns and current speeds near the bottom. The case study on...
Joint Spacing for Airfield Pavement
This paper looks at various factors affecting portland cement concrete(PCC) pavement cracking, with special emphasis on the effect of joint spacing on crack development. A rational approach...
The Effects of Runway Roughness on Aircraft Fatigue Life
A computer code developed within the Flight Dynamics Directorate of the Wright Laboratory was used to simulate the dynamic response of heavy aircraft operating on runways with various...
Asphaltic Concrete Performance Under High Pressure Tires
A study was conducted by the USAF Engineering and Services Laboratory to evaluate the rutting effects of high pressure tires on Marshall and gyratory designed pavements. Full scale pavement...
Performance of Airport PCC Pavements During Spring Thaw Periods
The portland cement concrete (PCC) pavements at two Wisconsin airports, Central Wisconsin Airport in Mosinee, and Outagamie County Airport in Appleton, were monitored during spring thaw...
Prediction of Airfield Pavement Responses Using Transfer Functions
A methodology is presented which will aid in the evaluation and maintenance of airfield pavements. Predictions of an airfield pavement's behavior to multiple types and magnitudes...
ACN-PCN Concepts for Airport Pavement Management
The aircraft classification number-pavement classification number (ACN-PCN) method is the standardized International Civil Aviation Organization (ICAO) method for reporting airport pavement...
Geotechnical Engineering Congress?1991
This proceedings,
Guidelines for Electrical Transmission Line Structural Loading
This manual presents detailed guidelines and procedures for developing transmission line structure loads. It is divided into four sections. The first section is concerned with the load/strength...
Specification for the Design of Cold-Formed Stainless Steel Structural Members
ASCE's standard
Pile Test for Earthquake Repair
Load testing for existing concrete piles was specified as part of a seismic retrofit at the Port of Oakland after the Loma Prieta event. The Port wished to use heavier cranes at cargo...
Return to search