Steep Constructed Stream Channels and Chutes
Research and technology transfer needs are described for steep stream channels and chutes. Iterative processes are presented for design and construction of bouldery channels and chutes...
Design of Manning's-Rougness-Coefficient Study in New York State
Field-collected hydraulic data can be used to compute roughness coefficients for channels with different hydraulic characteristics. Suggested criteria for the design of a roughness-coefficient...
At-A-Site Mountain River Flow Resistance Variation
At-a-site variation in flow resistance is examined in the light of observations of an S-shaped velocity profile at relative submergences (d/D84)...
Evaluating Flow Resistance Using Height of Roughness Protrusions
On the basis of field measurements on the Sumava mountain rivers heights of roughness protrusions have been used for calculation of flow resistance. The result resistance equations, compared...
Flow Resistance of High-Gradient Gravel Channels
The flow resistance in terms of the friction factor for bank-full or high in-bank flows for 120 high-gradient gravel-bed rivers are examined. The friction factor f was divided into grain...
Step-Pool Streams: An Adjustment to Maximum Flow Resistance
An experiment was conducted to study the maximum flow resistance of step pool streams and the morphology of the steps formed from clastic materials. The step pool formation was qualitatively...
Relation Between Largest Known Flood Discharge and Elevation in Montana
Previous studies relating unit discharge to elevation indicated that large floods in the Rocky Mountains may be limited by elevation. However, high-elevation data are sparse in Montana...
Historic-Flood Evaluation and Research Needs in Mountainous Areas
An evaluation of historic flood estimates in mountainous areas in Colorado was made to assess their accuracy. The purpose of this evaluation is to enhance awareness of the need to assess...
3D model verification for a groyne and harbor experiment
A discussion of 3D model verification and calibration based on measurements in a flume is carried out for different test cases (groyne, harbor). The measurement data is available for public...
Estimation of Design Surge Heights by Utilizing Meteorologic and Oceanographic Data
Data on cyclonic storm surge height have been generated with the help of a statistical simulation model. Data on observed maximum cyclonic wind speed and the length of the continental...
Velocity Control Rings for RC Pipe on Steep Slopes
This paper discusses the use of internal concrete rings to reduce velocity and concrete erosion for reinforced concrete pipes on steep slopes in the Southern California area....
Sediment Transport in Sewers and Design Implications
Extended studies on sediment transport in sewers were conducted at the University of Newcastle upon Tyne and using this new as well as previously available data an attempt has been made...
Plunge-Pool Scour by Inclined Jets
A series of experiments were performed in a sand-bed plunge pool with circular jets produced by nozzles at different angles and elevations and conveying different flow discharges. The...
Management of Sediments on the Red River Waterway Project
The Red River is a large alluvial river system with the lower 280 miles currently being developed for shallow draft navigation. The navigation project entails construction of five locks...
An Improved Design of Excluding Sediment into River Intake Structures
The function of excluding sediment into river intake structures is usually achieved by the device of sluice ways. Although many sluice ways have been constructed and many formulas are...
Why Design Storm Methods Have Become Unethical
This paper discriminates between continuous and event modelling, and describes some dimensions of ethical design for sustainable ecosystems. Arguments are presented that event modelling...
Combined Stormwater Drainage and Treatment
Due to continuing public concern regarding environmental protection for the nation's waterways, new and more stringent water quality control regulations have been developed. This is most...
Water Quality Enhancement Technology for River-Reservoir Systems
Water quality enhancement technology is applied to a wide variety of field conditions in surface waters including rivers, lakes and reservoir epiliminia, lake and reservoir hypolimnia,...
Model of an Upgrade
As further studies and more extensive computer models help engineers better understand the workings of wastewater treatment plant processes, those engineers are finding more efficient...
Malaysia's Twins: High-Rise, High Strength
U.S. firms, following the market for new skyscrapers to Asia, are involved in design and construction of twin office towers in the commercial heart of Kuala Lumpur, Malaysia that will...
Return to search