Stress Wave Interaction in Finite Beam on Elastic Foundation
The short-time behavior of a finite Timeshenko beam on a Winkler foundation subjected to step and impulse loadings is presented. The transient behavior was analyzed by using the method...
Shear Flow Between Walls in Relative Motion
The paper reports on experiments on Couette flow, i.e., the shear-induced flow between surfaces which are in motion relative to each other. The novel aspect of the work is the appearance...
Harmonic Excitation of an Unconstrained Saturated Particle Bed
Past research on the flow of concentrated cohensinless mixtures have historically emphasized steady or quasi-steady motions while dynamic effects have received little attention in comparison....
Postbuckling Behavior of Stiffened Composite Shell Panels
The paper summarizes the current status of an ongoing study on the postbuckling behavior of thick and moderately thick composite stiffened shells. Axially compressed moderately thick panels...
Leakage Characteristics of the St. Jude Heart Valve
The requirement for anticoagulant therapy in patients implanted with mechanical heart valve prostheses is well known. A plausible explanation for this requirement is that the leakage flow...
Intra Vena Cava Balloon Pumping
An innovative prototype intravenous hollow-fiber oxygenator was developed in 1984 by B.G. Hattler. The device consisted of a microporous, hollow-fiber membrane oxygenator inserted into...
The Effective Stress Path for Soil at High Pressure
The effect of increasing stiffness in the soil skeleton on the effective stress path in undrained triaxial compression tests is experimentally examined and found to not be significant....
A Sphere Moving Down an Inclined Bumpy Surface
A sphere moving down a bumpy incline in the air is studied theoretically and experimentally. A method based on the principle of energy conservation is used to express the average velocity...
Shear Resistance Models for Concrete Bridges
Statistical models are developed for the shear resistance of concrete bridge girders. Two structural types are considered: reinforced concrete T-beams and prestressed concrete AASHTO girders....
Fluid Dynamics at the Carotid Bifurcation
Arterial wall distensibility is believed to be of secondary importance to the general flowfield of the human carotid artery. However, it has been reported that it may have greater influence...
The Generalized Brazier Problem for Orthotropic Straight Tubes of Finite Length
A new engineering approach, based upon a mixed variational functional, is presented for the analysis of the nonlinear static behavior of thin-walled, circular-cross-section cylindrical...
Crushing Response of Energy Absorbing Composite Structure
A description of why and how composite structures crush and absorb energy is presented. The three primary crushing modes of composite structure (transverse shearing, lamina bending and...
Eigenproperties of a Twisted, Nonuniform Rotating Beam by the Finite Element Method
A initially twisted blade with nonuniform properties along the length, is rotating with constant angular velocity about an axis perpendicular to it's elastic axis. The blade is modeled...
Flow Dynamics in an End-to-End Vascular Graft Junction
A study consisting of both experimental and numerical methods was performed to determine flow dynamics in the vicinity of an end-to-end anastomosis. The experimentally determined geometries...
Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...
Modeling Bond Stress-Slip of Reinforcing Bars Embedded in SIFCON
A brief description is given of the mechanisms associated with the bond shear stress versus slip response of deformed reinforcing bars embedded in slurry infiltrated fiber concrete (SIFCON)....
Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....
Failure Prediction of Anisotropic Material
Basic mathematical elements of a higher order failure theory for anisotropic material are outlined. Surface closure is ensured by requiring a tensor polynomial to satisfy constraint conditions....
Modeling the Chaotic Behavior in Simple Shear Granular Flows
Simple shear granular flows have demonstrated a variety of puzzling phenomena. Both computer simulations and physical experiments have discovered particle grouping, layering and shear...
Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....
Return to search