ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Energy Losses in Steep Tributary Streams at Flows Near The Threshold of Bedload Entrainment
The flow patterns in mountain tributary streams that depends on the channel morphology, cobbles, boulders and debris that protrude along the channel and bank height cause energy losses...

A General Theory of Channel Adjustment in High Gradient Streams
The paper presents a theory of channel adjustment in high gradient streams. This theory states that given sufficient energy, stream channels will adjust their dimensions and flow hydraulics...

Step Pool Geometry and Flow Characteristics in Low-Sediment-Storage Channel Beds
Data from two small ephemeral streams in Israel indicate that step pool geometry in bedrock channels is similar, in its salient features, to that in alluvial channels. For steep (>0.10)...

Analysis of blocking phenomena in bifurcated channels found in mountainous rivers
The paper presents an analysis of blocking phenomena in bifurcated channels found in mountain rivers. A change of channels may be caused by deposition of sediments which blocks the entrance...

Streamflow Related to Channel Geometry in Northern New England
Channel geometry measurements can be used to estimate various streamflow characteristics at ungaged stream locations. Channel cross section dimensions and sediment size distributions were...

Characterization of Incised Channel Development
A combination of hydraulic and geotechnical techniques have been applied to predict future cross-section morphology in incised channels. The SAM program (Copeland, 1991) computes combinations...

Expansion and Contraction of Powder River Between Moorhead and Broadus, MT: Geomorphic Observations and Numerical Modeling
Sixteen years of annual surveys demonstrate that the channel of Powder River expands at high flows and contracts at low flows. Channel contraction is associated with the formation of benches...

Management of Sediments on the Red River Waterway Project
The Red River is a large alluvial river system with the lower 280 miles currently being developed for shallow draft navigation. The navigation project entails construction of five locks...

Temporal and Spatial Variations of Suspended Sediment Concentration during Navigation Traffic in a Natural River
Suspended sediment samples were collected within the channel border area during barge-tow passage events at three cross-sectional locations on the Upper Mississippi River. Typical plots...

Sediment Modeling in the Rio Grande Conveyance Channel
The Rio Grande Conveyance Channel and the Rio Grande Floodway convey water from the San Acacia diversion dam to Elephant Butte Reservoir. The Conveyance Channel was built in early 1950's...

Sandbar Formation in Side-Diversion Channels
Prediction of sandbar formation in side-diversion channels is desirable in a wide range of river engineering problems. However, the mechanism by which they form is still not well understood...

Chicago's Waterfalls
The 1994 Outstanding Civil Engineering Achievement Award goes to successful implementation of an elegantly simple idea: aerate sluggish water by letting it fall through man-made waterfalls....

GPS Goes Real Time
This paper discusses the feasibility of Trimble Navigation's Site Surveyor System using Real-Time Kinematic (RTK) technology for conducting cadastral surveys. The use of RTK...

Applying Sustainable Development
Experts hoping to lessen the harsh effects of development on Earth's ecosystem have turned to the concept of sustainable development. Engineers are finding old ways to put...

Design of Shotcrete Linings at the Channel Tunnel
Shotcrete is one of the essential support elements of tunnels driven according to the principles of the New Austrian Tunnelling Method (NATM). Whereas originally the NATM was mainly based...

Construction of Shotcrete Linings Channel Tunnel
Without the use of shotcrete and the flexibility it offers in terms of tunnel profile, economy and speed of tunnelling, the project would certainly not be as far advanced as it is at present....

Modeling of the Ventilation for Emplacement Drift Re-Entry and Rock Drying
Different ventilation scenarios were analyzed for a hot repository with a 114 kw/Acre heat load, to determine the time required to cool a drift to the point where the temperature of the...

Modeling of Fluid and Solute Transport in Fractured Rock
A new model for flow and solute transport in fractured rock is proposed. It is based on the concept of a network of channels. The individual channel members are given stochastically selected...

Channel Network Models for Solute Migration and Dispersal
We introduce a class of channel-network models for solute migration and dispersal in saturated rock. In discussing the behaviour of any dispersive process it is necessary to compare and...

Application of the Global Positioning System to Locating Remote Sites
The location of Near Field (NF) sampling stations, used for the radiological monitoring program portion of the site characterization phase of the Yucca Mountain Project, were determined...

 

 

 

 

Return to search