Composite Materials for Structures on Planetary Surfaces
Development of structures for planetary surface environments depends upon the use of the most appropriate materials. Advanced composite materials are apparently the best candidates for...
Comparison of Micromechanical Models for Elastic Properties
The effective elastic properties for unidirectional composites, as predicted by several analytical micromechanical models are compared for glass/epoxy and graphite/epoxy. A brief review...
Optimum Design of Laminated Composites
The increased demand for high strength, light weight materials that function successfully in high temperature environments has caused the effective development of laminated composites...
Combustion Synthesis of Advanced Materials
The combustion synthesis of ceramic-metal composites using an in-situ liquid infiltration technique is described. The effect of varying the reactants and their stoichiometry to provide...
Fiber: Good For the Concrete Diet?
Fiber reinforcement of concrete has many advantages, but after thirty years of research those benefits have most often been seen in a laboratory. Some materials, such as synthetic fibers,...
Stochastic Modeling of Short Fiber Reinforced Composites?A Review
Since the early 1960's, an extensive research and development has been carried out with fiber reinforced cements and concretes. Modeling of such heterogeneous material is still in the...
Optimal Configuration for Fiber Reinforced Composites under Uncertainties of Material Properties and Loadings
Fiber reinforced composite structures could be designed by selecting proper fiber orientation in structures to suit specified desires for strength, stiffness or other mechanical properties....
Design and Construction of a Bonded Fiber Concrete Overlay of CRCP (Louisiana, Interstate Route 10, August 1990)
The purpose of this study was the design and construction of a bonded steel fiber reinforced concrete overlay on an existing 8-inch CRC pavement on Interstate 10 south of Baton Rouge,...
Composites Performance in the Infrastructure
Fiberglass reinforced plastics (FRP) composites have been used in demanding structural applications, mostly for special corrosion resistant construction products, for several decades....
Unidirected Twined-Strand Composites and Their Uses
Twined strand composites are a new class of unidirected continuous-fiber-reinforced composite materials where the orientation of the continuous fibers is a twine of unidirected helically...
Full Scale Tests on Concentrically Loaded Fiber-Reinforced Pultruded Columns
This paper briefly reports on the experimental investigation in connection with the short term behavior of pultruded structural members under concentric loading. In particular, results...
Experimental Investigation of Self-Tapping Fasteners for Attachment of Corrugated Cladding Panels to Pultruded Fiber-Reinforced Plastics Beams in Industrial Building Construction
This paper describes an experimental investigation of self-tapping fasteners for the attachment of corrugated fiber-reinforced plastics (FRP) cladding panels to pultruded FRP beams. Although...
Bond Strength of Straight GFRP Rebars
An overview of a study on bond of straight Glass-fiber-reinforced-plastic (GFRP) rebars to concrete is presented. The 54 specimens to be tested include several variables, such as the mode...
Glass-Fiber Reinforcing Rod: Characterization and Application to Concrete Structures and Grouted Anchors
This paper presents the physical and mechanical characteristics of a new glass-fiber reinforcing rod which was developed to be used as a rebar for concrete structures or a tendon for grouted...
Tests of Full-Size Pultruded FRP Grating Reinforced Concrete Bridge Decks
Results of tests of full-size concrete bridge deck slabs reinforced with commercially produced pultruded fiber-reinforced plastic (FRP) gratings are presented. The slabs were designed...
Splice/Development Length Requirements for FRP Grids Used in the Structural Reinforcement of Concrete
The research presented in this paper program was directed towards determining development length and splice requirements for FRP grids used in the reinforcement of concrete structures....
Feasibility of FRP Molded Grating-Concrete Composites for One-Way Slab Systems
This paper describes the behavior of one-way concrete slabs reinforced with Fiberglass Reinforced Plastic (FRP) molded grating. FRP molded grating is commercially available and is mainly...
Hybrid (FRP+Steel) Reinforcement for Concrete Structures
The most popular method to prevent corrosion of steel rebars and prestressing tendons is epoxy coating. This paper presents an alternative approach consisting in the combination of a fiber-reinforced-plastic...
Behavior of Externally Confined Concrete Columns
This paper investigates the feasibility of strengthening of seismically deficient concrete columns with high-strength fiber composite straps. The concrete columns will be externally confined...
Fiber/Epoxy Composites Strengthen Bridge Columns
The California Department of Transportation is using high strength fiber/epoxy composites to strengthen existing reinforced concrete bridge columns. These advanced composite materials...
Return to search