ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

The Role of Computer Graphics in Teleoperation
Computer graphics techniques developed by the Advanced Teleoperation (ATOP) Project at the Jet Propulsion Laboratory (JPL) for the control of remote manipulators, primarily for space applications,...

Real-time Motion Vision for Robot Control in Unstructured Environments
The control of robots in unstructured environments demands real-time, general purpose vision. We have designed a visual tracking system which makes use of motion to pick out and track...

Application of Virtual Reality to Space Robotics Operations
This paper discusses a Virtual Reality (VR) simulation under development by the Automation and Robotics (A&R) Division at the Johnson Space Center (JSC). Over the past twelve years,...

Navigation of Autonomous Mobile Robots
An integrated navigational system for autonomous mobile robots features a primary navigator, such as an inertial navigation or a dead-reckoning system, and a secondary navigator. The secondary...

Developing Plans for Robotic Excavators
We would like a robot excavator that is able to excavate a volume of soil according to specification. To this end we have developed a general method that can be used to provide prescriptions...

Inertially Favorable Trajectories for Robot Motion in Space
Robot manipulators generally display non-linear coupled dynamic forces which increase with speed. Efficiencies can be achieved by finding trajectories which take advantage of those inertial...

Improving Dynamic Finite Element Models Using Test Data
A structural optimization based method was developed to improve the finite element model to achieve good agreement with the test results. The modal displacements at critical locations...

Dynamic Analysis of a High Speed Transport Model by Using a Piecewise Continuous Timoshenko Beam Model
Conventional treatment of structural dynamic analysis and control is based on the finite element structural model. But such a treatment uses a very large number of elements which is usually...

Braced Double Skinned Structure in Lunar Application
A parametric study is designed to evaluate a proposed Braced Double Skinned roof structure utilizing extrapolated theoretical solutions i.e. Navier's solution and Levy's solution. A Finite...

Thermoelastic Theory of Cylindrical Sandwich Shells with Piezoelectric Sensors or Actuators
Cylindrical sandwich shells with piezoelectric longitudinal and ring elements bonded to the outer and inner surfaces are considered in this paper. Thermal effects are included in the analysis,...

Comparison of Donnell and Higher Order Nonlinear Models for Dynamically Loaded Composite Plates and Shells
The dynamic buckling behavior of composite cylindrical shells subjected to a transverse point load is considered. The behavior of undamped cylindrical shells of varying radii is analyzed...

Nonlinear Analysis of Stiffened Laminated Cylindrical Shells Using the Layerwise Theory of Reddy
The layerwise shell theory of Reddy is used to develop the buckling and the postbuckling equations of circular cylindrical shells reinforced by means of axial and ring stiffeners and subject...

Large Deformation Theory Using Truncated Rotations
Today's aerospace industry has advanced to the point of using optimum design techniques in virtually all applications. In structural elements, orthotropic fiber composite materials have...

Analysis of Composite Panels Using Newton's Method
Postbuckling response prediction of composite panels using Newton's method will be discussed. The traditional approach of nonlinear finite element analysis is to use a Newton-Raphson approach...

Allowable Design Loads for Marman Clamp Systems
Marman clamp separation systems have many aerospace applications. One of their most important applications is in the attachment of spacecraft to expendable launch vehicles. Because their...

Inelastic Response of Metal Matrix Composite Tubes
An analytical method which exactly satisfies the equations of the boundary value problem for the inelastic response of laminated metal matrix composite tubes on a point-wise basis is presented....

Late Stage Damage in G30-500/PMR-15 Laminates
Damage progression has been studied experimentally under tension using [0₂/90₆]_s...

Thermal Stresses in Piezoelectric Materials: A Boundary Integral Formulation
With the increasing use of piezoelectric materials in electromechanical devices which are often required to function in thermally hostile environment, thermal stresses and their influence...

Convergence Rates of the Method of Successive Elastic Solutions in Thermoplastic Problems of a Layered Concentric Cylinder
This paper examines convergence rates of the method of successive elastic solutions, proposed by Mendelson, in determining the thermoplastic response of an arbitrarily layered concentric...

Implementation of a Viscoplastic, Kinematic Hardening Constitutive Model for Impact Prediction
This paper reports on a preliminary study to determine the significance of the Bauschinger effect on modeling impact and other large deformation events. Such events have significant implications...

 

 

 

 

Return to search