VOCs: The New Effluent
The Clean Air Act of 1990, in addition to many state and local regulations, has officials of publicly-owned treatment works (POTWs) shifting their focus, and funds, to air toxic emissions...
A New Era In Transportation
Its passage into law was about as smooth as a rush-hour traffic jam, but the surprising thing about the new Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) is that it...
Size, Temperature and Rate Effects on the Fracture Toughness of Saline Ice
This paper presents the results of an extensive experimental study performed with the aim of investigating the effects of temperature, size and loading rate on the fracture toughness of...
Three-Dimensional Thermal Jump in Stratified Cooling Channel
This study is concerned with basic properties of three-dimensional thermal jumps. Temperature measurements obtained in three-dimensional thermal jumps are presented. The jumps analyzed...
Steady-State Nonlinear Heat Transfer in Multilayered Composite Panels
A two-dimensional computational model is developed for the nonlinear heat transfer in multilayered composite panels. The model is based on a first-order thermal lamination theory with...
Slip Velocity and Temperature Jump in Flow over Rough Surface
The expressions for the slip velocity and the temperature jump are determined and used as the boundary conditions in the calculation of turbulent flow over rough surfaces. The slip velocity...
Unconfined Granular Materials Thermalized by Fluctuating Horizontal Surfaces
We calculate the solid fraction and granular temperature throughout assemblies of identical, smooth, inelastic spheres that are unconfined from above and thermalized from below by bumpy,...
Thermal Load for p-Version Laminated Elements
A p-version finite element formulation is presented for determining temperature stresses in laminated composite axisymmetric problems. Formulation for a rectangular axisymmetric p-version...
Inflation Concept Development for Inflatable Lunar Structures
Inflatable structures require mechanical equipment to initiate and maintain inflation. Several inflatable structural shapes and forms have been proposed by a number of different authors....
In-situ Release of Solar Wind Gases from Lunar Soil
A concept is described which has the potential to perform the in-situ heating of the lunar regolith in order to release the solar wind gases. The poor thermal conductivity of the lunar...
Recent Developments of the Carbotek Process for Production of Lunar Oxygen
Carbotek and Shimizu Corporation are conducting joint development work on the further development of the Carbotek Process to produce oxygen from lunar ilemnite by hydrogen reduction. The...
Production of Oxygen by Electro-Reduction of Lunar Ores
Anorthositic Lunar ores contain approximately 42 wt. pct. of oxygen. An electrolytic dissociation of the ore can provide a rich source of gaseous oxygen with silicon, aluminum, calcium,...
Space Habitat Contaminant Growth Models?Part II
This paper reports on the continuation of work being done at NASA's Center for Space Environmental Health (CSEH) at the University of Colorado at Boulder on contaminant growth modelling...
Mitigation of Dust Contamination During EVA Operations on the Moon and Mars
The Space Exploration initiative is charting a new course for human exploration of the Moon and Mars. Advances in EVA system have been identified as being critical for enabling long-duration...
Thermal Investigation of a Large Lunar Telescope
Recent interest in construction of a large telescope on the Lunar surface (Nein and Davis, 1991; Bely, Burrows, and Illingworth, 1989) has prompted this feasibility study of a thermal...
In Situ Recovery of Water from Dormant Comet Cores & CI Carbonaceous Chondrites
Water and volatiles may be produced by drill holes into dormant comet cores or class CI or CM asteroids. This is modeled after in-situ mining as in the Frasch process sulfur mines of the...
The Design and Use of Flow-Through Hold Pads
The Chicago Delay Task Force recommended the construction of nine largescale, flow-through hold pads at Chicago O'Hare International Airport to reduce the potential for airfield gridlock....
Fine Tuning the Airfield: The New Denver International Airport
This paper discusses airfield layout considerations that have been incorporated into the design of the new Denver International Airport (DIA). These concepts include some unique provisions...
Characteristics of High-Speed Runway Exits for Airport Design
This paper addresses some of the geometric design and operational characteristics of high-speed runway exists. Lateral and longitudinal runway constraints limiting the use of high-speed...
The Army Aviation Team from a Military Civil Engineer's Perspective
The Technical Session for which this paper is written is 'Airfield Pavements - A Team Effort.' As such, the emphasis on this paper is the United States Army Aviation Team, and not the...
Return to search