Simplified Numerical Analysis on Earthquake Response of Irregularly Bounded Surface Layer
Evaluation of seismic response of a soft surface layer is the essence in a design of a lifeline in this layer. For this purpose, a quasi-three dimensional ground model was developed by...
SINOD?A Location Reference Tool for Road Information Systems
This paper focuses on the setting up of a location reference system - named SINOD - envisaged as a basic requirement for on going actions and for expected developments in the field of...
Evaluation of Reliability of Road Network for Better Performance, Advanced Management and Future Network Design
This paper proposes reliability as a new indicator for advanced management and future construction of road networks; and also presents a new reliability analysis method. This article contains...
Magnetically levitated vehicle technology, maglev, serves as a potential solution to ever increasing transportation demands. Though interest in maglev appears to be increasing, an appropriate...
Rail Replacement Planning: A Knowledge System Approach
Replacer is a knowledge system that provides a consistent means for developing plans for rail replacement. It was developed, tested, and evaluated in cooperation with Burlington Northern...
Computer Aided Engineering Analysis for Transportation Links ? Management Options
CAD applications on Engineering Analysis have proved very effective in view of its wide applicability & the conceptualization power of interactive computer graphics (ICG). Transportation...
A Catastrophe Theory Approach to Freeway Incident Detection
This paper discusses an approach to incident detection on freeways that classifies traffic conditions at a single station rather than by comparing conditions at adjacent stations. The...
Physical Model Testing of Barbers Point Harbor and Marina Complex
A three-dimensional, physical model study of the Barbers Point, Hawaii harbor and marina complex is being conducted at the US Army Engineer Waterways Experiment Station, Coastal Engineering...
Dana Point Harbor, Orange County, California (A Shallow-Draft Marina)
Dana Point is a shallow draft harbor for 2500 permanently moored vessels. Marina Amenities include boat launching ramps, trailered boat storage, a fuel dock, and sport fishing facilities....
Application of a Numerical Model to Develop Marina Concepts
A numerical model is presented to evaluate wave conditions in a marina basin for development and analysis of marina concepts. This model is based on the boundary integral equation method...
A Case Study of Propeller-Induced Currents and Sediment Transport in a Small Harbor
The operation of vessels in marinas and small harbors can provide important driving forces affecting ambient circulation patterns and current speeds near the bottom. The case study on...
Prospectus for Marinas 2000
This paper is an outline presentation of the method of achieving a proposed specialty workshop on marina planning, design, and construction for the Twenty-First Century by the Waterway,...
Influence of Rigidity of Soil Surrounding Shield Tunnel Upon Equivalent Rigidity of the Tunnel in Axial Direction
The purpose of this study is to investigate the interaction between ground surrounding a shield-driven tunnel and segments, especially their ring-joint portion. When a seismic force acts...
ACN-PCN Concepts for Airport Pavement Management
The aircraft classification number-pavement classification number (ACN-PCN) method is the standardized International Civil Aviation Organization (ICAO) method for reporting airport pavement...
Geotechnical Engineering Congress?1991
This proceedings,
Working Breakwaters
Along the Virginia portion of the Chesapeake Bay, shoreline erosion has erased about 40,000 acres of land since 1850. Now a series of headland breakwater systems stems erosion up and down...
Fully Nonlienar Models to Simulate Structural Response to Wind Loading
The paper summarizes some results of the analyses of two tall broadcasting towers, obtained by means of a specially developed numerical procedure taking into account all relevant nonlinear...
Automated Damage-Controlled Design of RC Buildings
This paper presents an automated damage-controlled design method, which aims for uniform damage distribution throughout the entire building frame while respecting the strong-column weak-beam...
Iterative Subsystem Analysis for Seismic Monte Carlo Studies
Three iterative subsystem analysis techniques for Monte Carlo simulation of response time histories are examined. The three subsystems are designated primary, secondary, and interface,...
On Aseismic Hybrid Control System
One type of hybrid control system is proposed for protecting tall buildings subjected to strong earthquakes. The hybrid system consists of a base isolation system connected to either a...
Return to search