Response Analysis of an Elasto-Plastic System Under Nonstationary Random Input
This study presents that the variance of cumulative plastic deformation of a simple elasto-plastic structure under seismic excitation can be estimated in a relatively simple theoretical...
Expected Failure Time of Fiber Bundle Systems Subject to Gaussian Load Processes
Methods are developed for estimating the reliability and failure time of Daniels systems subject to Gaussian load processes. These systems consist of a set of parallel fibers and can carry...
Response Variability of Isolated Structure Due to Randomness of Isolation Devices
Effect of randomness of restoring characteristics of an isolation device, which is considered to result from the randomness of material properties, configuration and setting error, on...
Effect of Microporosity on Notched Specimen Fatigue Life
The present work examines notched fatigue performance of aluminum alloy 7050-T7451 thick plate containing microporosity. Open hole fatigue specimens from low microporosity and high microporosity...
Application of Probabilistic Approach for Crack Growth Damage Accumulation in Metallic Structures
Two stochastic crack growth approaches (i.e., 'general' and 'analytical') are presented and evaluated for predicting the crack growth...
Potential Applicability of Mathematical Statistics in Stochastic Modelling of Failure Phenomena
Failure phenomena should be investigated clearly with a good understanding of engineering uncertainties associated with strength of the material as well as randomly applied load. In this...
Fatigue Reliability of Components Containing Microstructural Flaws
A probabilistic crack growth model is presented in which the different stages of crack growth including the small crack regime are taken into account. The microstructural parameter determining...
Probabilistic Analysis of the Ghonem and Dore Data
A two-state Markov process model for fatigue crack growth is utilized with experimental fatigue crack growth data reported by H. Ghonem and S. Dore to study the effect of stress ratio...
Diffusion Models of Fatigue Crack Growth with Sequence Effects Due to Stationary Random Loads
A new fatigue crack growth model that includes load sequence effects is formulated. This model includes a load history dependent parameter, the reset stress, which reflects the state of...
Analysis of Fatigue Crack Propagation Under Random Loading by Markov Chain
Fatigue crack propagation is simulated in terms of a discrete Markov process considering both the randomness of crack propagation resistance and the randomness of external loading, which...
Statistical Fatigue Properties of Carbon Steels for Machine Structural Use Based on JSMS Database on Fatigue Strength of Metallic Materials
A database on the fatigue strength of metallic materials was compiled by collecting the experimental fatigue data of the last 20 years in Japan on a nationwide scale as a joint project...
Distribution of Variance of Fatigue Lives of Ferrous Metals by the Analysis of Fatigue Strength Database
The purpose of this study is to determine the distribution characteristics of variance of fatigue lives of carbon and alloy steels, especially from the viewpoint of their dependence on...
Statistical Fatigue Crack Propagation of a Superalloy Under a Block Type Spectrum Loading at Elevated Temperature
A lognormal statistical model was developed for the prediction of crack growth damage accumulations of superalloys under a block type spectrum loading at elevated temperature. Both the...
Damage Process of Composite Material with Randomly Oriented Fibers
A numerical procedure is formulated to make clear the damage process of composite materials with randomly oriented fibers. These composites often have complicated fiber oriented states,...
Fatigue Design and Reliability Analysis of CFRP Composites
The statistical fatigue properties of unidirectional (UD) T800/3631 carbon/epoxy composite laminates are investigated in this paper. Fatigue tests were conducted under rotating bending....
Fatigue Test Using Multi-Notched Specimen and its Reliability Analysis
This paper presents a fatigue testing method using a multi-notched test specimen for the purpose of estimating the distribution function of fatigue crack initiation life by a small number...
Adaptive Reliability-Based Inspection Strategies for Structures Subject to Fatigue
Metallic structures subject to substantial load-induced fatigue must be inspected from time to time and, possibly, repaired or even put out of service if the damage has reached critical...
Objective Comparison of Fatigue Crack Growth Laws
This paper presents objective criteria for choosing between different fatigue crack growth laws to represent a material's fatigue behavior based on a data set containing multiple...
Fatigue Crack Closure Under Random Loading
The goals of the research are to determine fatigue crack growth rates for stationary random amplitude loadings with arbitrary mean stress. Fatigue crack closure theory is applied to justify...
An Investigation of Live Loads on Concrete Structures During Construction
Slab formwork live loads include the weight of equipment, construction material storage loads, and impact loads when placing the concrete. In this paper material and equipment loads are...
Return to search