A Critique of the Ultrasonic Pulse Velocity Method for Testing Concrete
The pulse velocity method is the most widely used ultrasonic nondestructive method for assessing concrete quality. However, it has been well established that the relation between ultrasonic...
Frequency Spectrum Analysis of Ultrasonic Testing Signal in Concrete
Description is given on high-speed sample apparatus connected with the CTS-25 low frequency ultrasonoscope and computer, the time domain of ultrasonic testing signal is transformed to...
Condition Monitoring of Structures Using Transient Response
Condition monitoring of structures by measuring transient response and tracking the derived modal parameters has been applied with success in three laboratory studies. Where modal parameters...
Numerical Simulation of Dynamic Shear Transfer
This study was focused on the dynamic response of concrete interfaces under the effects of impulsive loads, and the relationship between the interface shear transfer and the response in...
Nondestructive Crack Identification by Acoustic Emission Analysis and Ultrasonic Frequency Response
Nondestructive evaluation (NDE) by the acoustic emission (AE) analysis and the ultrasonic testing (UT) on the spectral (frequency) response is studied to identify crack geometry. AE waveform...
Pullout Testing of High-Strength Concrete Members
An experimental investigation of a high-strength concrete mixture was undertaken to measure and evaluate pullout and compressive strength properties. Two columns, a slab, and cylindrical...
Geomechanics of Subsidence Due to Pumping of Groundwater
In this talk we describe a nonlinear theory for the classical problem of pumping of groundwater from a layered soil. The model soil system consists of three horizontal layers where a very...
Adaptive and Parallel Methods for Nonlinear Solid Mechanics
The solution of nonlinear problems, which are of importance to industry and in scientific computations, requires increasing degrees of resolution. This high degree of resolution can be...
On the Influence of Seismically Induced Residual Forces on Bridge Abutment Design
The seismic design of bridge abutments depend on the anticipated movement of the abutment during the design earthquake. For seat-type abutments in which the backfill resistance can be...
Bayesian Reliability Updating of Existing Steel Girder Bridges
Bayesian statistics is used to update the reliability of existing composite steel girder bridges. A 60 ft. long simply supported superstructure is considered. The reliability for the ultimate...
Wind Cross-Spectrum Effects on Long-Span Bridges
This paper discusses current analysis for long span bridge response based on wind components. The authors summarize the development of techniques which take such components into account,...
Wave Interaction with Fluid Mud in Rectangular Trench
Wave interaction with fluid mud in a rectangular trench is studied theoretically based on small-amplitude wave theory. The problem was formulated using the Voigt model for an viscoelastic...
The Effect of Wave Grouping on the Characteristic Wave Height
Wave data from two field stations and from the laboratory tests have been analyzed. The groupiness factor is used to categorize the wave data for the discussion of the correlation between...
Micromechanics and Effective Properties of Elastic Particulate Composites
A new micromechanical framework is proposed to investigate the effective mechanical properties of elastic particulate multiphase composites. Exact ensemble-volume averaged field equations...
Damage Dependent Micromechanics in Metal Matrix Composites
A computational approach is used herein to model the effects of processing induced thermal residual stresses on radial, hoop, and shear stresses at the fiber/matrix interface in a continuous...
On Distributed Processing Applications in Finite Element Analysis
Computer architectures may be classified by the relationship between their instruction and data streams (SISD, SIMD, MISD, MIMD) and the locality of memory (shared, local). Distributed...
Behaviour of Prestressed Concrete End Blocks
This paper briefly reports on a series of experiments carried out on strip-loaded prestressed concrete end blocks. The results show that corresponding design methods presently used in...
Large Deformation Elastic Behavior of Low-Density Solid Foams
A strain energy function that describes the nonlinear elastic response of a three-dimensional open-cell foam is developed. A tetrahedral unit cell containing four half-struts that join...
Mechanical Characterization of the Soft Tissue in Horse Hooves
The laminar corium tissue of the equine distal digit (or horse hoof) has been tested uniaxial tension. The laminar corium tissue lies between the hoof wall and the underlying bone of the...
Constitutive Modeling and Simulation of Energy Absorbing Polyurethane Foam Under Impact Loading
The compressive-stress strain response of polyurethane foam under uniaxial compressive impact loading has been studied. The development of a uniaxial constitutive model from strain rate...
Return to search