Nonlinear Analysis of Prestressed Concrete Structures
This paper presents a finite element model for the nonlinear analysis of prestressed concrete structures. The model can be used to analyze pretensioned or posttensioned, bonded or unbonded...

Recent Advances in 3D Non-Linear FE-Analysis of R/C and P/C Beam Structures
A new simple modelling of interface problems in non-linear FE-analysis of reinforced concrete (R/C) and prestressed concrete (P/ C) structures is presented. It consists in taking account...

Extreme Winds Estimation by `Peaks Over Threshold' and Epochal Methods
With a view to applying the 'peaks over threshold' method to the estimation of extreme wind sped data, we perform Monte Carlo simulations for which the parameters of the population distributions...

Cyclic Performance of Riveted Connections
As part of a larger experimental project on seismic performance of older steel frames, seven concrete-encased and unencased connections were tested. The specimens consisted of both riveted...

Steady-State Analysis of Buckle Propagation
A novel finite element technique for the analysis of buckle propagation in pipelines is presented. The propagation pressure, propagation profile, the state of stress, and deformation during...

Floor to Wall Anchors in Historic Brick Buildings
The poster presentation at the Structures' Congress details a retrofit analysis performed on the Gilroy Historic Commercial Building, which was instrumented during the Loma Prieta Earthquake....

What Controls the Ultimate Load of a Glulam Dome?
A glulam dome is analyzed with the finite element method to determine the governing failure mode and ultimate snow loads. The dome consists of a triangulated network of curved glulam beams,...

Non-Linear Solution Methods for Shell and Spatial Structures
Non-linear solution methods are investigated for the analysis of shell and spatial structures based on limited memory quasi-Newton updates. Under the proposed implementation the preconditioned...

Possibilities and Problems of Latticed Structures
Several fundamental aspects of space frames which are sometimes referred to as latticed structures are discussed. Terminology of the structural system is first considered. Special features...

Optimization of Space Lattice Structures with Multimodal Frequency Constraints
The paper presents an optimization algorithm for the design of space trusses subjected to constant value constraint. The goal of the optimization is a structure of the highest multiple...

Explorations in Geodesic Forms
Geodesic forms constitute an important family of structural systems. The objective of the paper is to show how the concepts of a mathematical tool called formex algebra and its programming...

Large Deformation Analysis of Lattice Truss Structures Including Hysteretic Material Behavior
A methodology is presented to analyze lattice truss structures including both material and geometric nonlinearities. Modeled member material behavior modes include: buckling, yielding,...

Nonlinear Buckling Response of Single Layer Latticed Barrel Vaults
Elastic overall buckling of single layer latticed barrel vault roof structures under static vertical loading is investigated using a fully nonlinear finite element solution procedure and...

Ultimate Loading Capacity of Braced Domes
The stability behaviors of a practical latticed dome with 40 metres span are studied in this paper. The geometric and material nonlinear behaviors, as well as the effects of the initial...

Georgia Dome Cable Roof Construction Techniques
This paper will provide a case study of the construction of the Hypar-Tensegrity Cable Roof for the Georgia Dome. The paper will emphasize innovative computer analysis of the construction...

Study on Mechanical Characteristics of Light-weight Complex Structure Composed of a Membrane and a Beam String Structure
This paper aims at studying a new type of Beam String Structure, in which a membrane is used as finishing material. This paper reports on the mechanical characteristics of this structure,...

Form Finding Numerical Methods for Tensegrity Systems
The rigidification of Tensegrity Systems is related to selfstress states which can be achieved only when geometrical and mechanical requirements are simultaneously satisfied. This paper...

A Shape-Finding Finite Element Analysis for an Equally-Stressed Surface in Membrane Structures
A finite element method is proposed to obtain an equally-stressed surface in a membrane structure, where the displacements and rotations of a membrane are in general finite and nonlinear....

Intermediate Support Cable Logging Systems
Cable systems for the transportation of fresh cut logs often employ existing trees as intermediate supports for the main support cable. Failure of these support trees is life threatening...

Concrete Shells Today
Providing high structural qualities, modern shells using experimental forms will attract new attention due to their limitless repertory. Presented is a new form of construction, instead...

 

 

 

 

Return to search