Introduction of Variational Principle Into Open Channel Hydrodynamics
Possible applications of the variational principle maximizing the entropy are illustrated. Open channel flow properties are expressed in terms of 'entropy parameter',...
Physical Modelling of Self Forming Alluvial Channels
A method is presented for the determination of a practicable physical model of self-forming channels in cohesionless alluvium. Both sand bed and gravel bed regime channels are considered....
Guard Gate Tests at Tieton Dam
The emergency gate hoist system on the guard gates at Tieton Dam, near Yakima, Washington, was tested as part of the United States Bureau of Reclamation Safety Evaluation of Existing Dams...
Conservation Properties of Flow Simulation Models
The fundamental equations of fluid mechanics and hydraulics posses certain integral properties which should be maintained by their discrete analogs. In this paper the conservation properties...
The Method of Lines Solution of Unsteady Open Channel Flow Equations Along Characteristics
The method of characteristics (MOC) has long been considered as a natural procedure for solving transient flow problems. In this paper, by using the concept of the method of lines, the...
Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...
Computational Open-Channel Hydraulics for Movable-Bed Problems
As a major branch of computational hydraulics, notable advances have been made in numerical modeling of unsteady open-channel flow since the beginning of the computer age. According to...
Urban Soft Bottom Low Flow Channel?A New Approach
In 1987, the City of Boulder, Colorado requested assistance from the Urban Drainage and Flood Control District (District) to repair an all too familiar problem of cattails growing in the...
Pressure and Stress Distributions Due to a Submerged Impinging Jet
This investigation examines the pressure and shear stress distribution at a smooth planar boundary in the impingement region of a submerged vertical jet in water. The mean pressure and...
The Effect of Aeration on Scour
A vertical water jet was used to study the effects of entrained air, tailwater depth, size of bed material, jet diameter, and jet velocity on scour. Small amounts of entrained air were...
A Multimode Scheme of Characteristic Method for Open Channel Flows
This paper deals with the stability and accuracy of a multimode scheme, based on the method of characteristics, for unsteady one-dimensional open-channels flows. This scheme combines three...
Hermite-Galerkin Model for Dam-Break Floods
A model based on the finite element method using cubic Hermite basis functions and Galerkin weighting was formulated to solve the partial differential equations that govern unsteady one-dimensional...
Diffusion Wave Overland Flow Module
This paper documents the diffusion-wave overland flow module contained in the FORTRAN-callable routine OVERLAND. Subjects covered include the theoretical background, model formulation,...
The Calculation of Flushing Flows for Gravel and Cobble Bed Rivers
Flushing flows are needed to remove fines and sand from a gravel or cobble bed river. A natural stream will have periodic high flows adequate for flushing of fines and sand, but the hydraulic...
Flow Field Near an Inland Navigation Tow
As a vessel moves through a body of water, disturbances are created in the form of altered water levels such as waves or drawdown and altered flow fields such as increased velocities and...
Prototype Measurements of Flows Induced by Navigation Tows
Present projections of growth of commerical navigation traffic indicate that annual tonnage per tow and/or number of tows will continue to increase through the foreseeable future. In order...
The Equivalence of Path and Node Methods for Water Distribution Network Analysis
This paper deals with the equivalence between commonly employed methods, path and node adjustment methods, for analyzing water distribution networks. The basic equations for steady-state...
Hydraulic Analysis for the Shot Tower Subway Station Beneath the Jones Falls
The objective of the hydraulic analysis is the formulation of a strategy to safely accommodate the construction of the Shot Tower Metro Station beneath the existing Jones Falls. The hydraulic...
Comparison of Flush and Chamber Mounted Dynamic Pressure Transducer
Modeling of hydraulic structures often includes the measurement of dynamic pressure fluctuations. The accuracy of the pressure measurements depends upon the geometry of the tap. Flush...
Coronarization of the Autonomous Water pump
The conventional hydraulic pressure multiplier has been successfully used by Belgian technician Robert Houman (1986) to provide a dependable source of water supply to the NATO-base at...
Return to search