Ductility Analysis of Overload and Settlement
The concept of sufficient ductility to avoid premature or brittle failures is gaining wide acceptance in structural engineering and is an important aspect in mitigating the consequences...
Development of an Improved Rapid Seismic Analysis Procedure
New developments in computer capabilities and lessons learned from recent earthquakes have facilitated improvement of the Rapid Seismic Analysis Procedure (RSAP) currently specified in...
Analysis of Masonry Walls with Smeared and Discrete Crack Models
To design modern reinforced masonry structures for seismic loads and to evaluate the seismic safety of existing unreinforced masonry buildings, the shear resistance of masonry shear walls...
Three-Dimensional Analysis Model for Complete Masonry Buildings
For the predictive and diagnostic analysis of the complete nonlinear response of masonry buildings to seismic load input, a 3-D finite element model is under development at UCSD. The model,...
New Views for Modeling Dynamic Response of URM Buildings
Various computational models are used to depict seismic response of an unreinforced masonry building that was subjected to the 1989 Loma Prieta Earthquake. The worthiness of various analytical...
Interactive Buckling Analysis of Stiffened Shells Using Pregnant Sheel Elements
Two distinctive modes of failure dominate the failure of stiffened plates and shells, viz. the short-wave local mode and the long-wave overall mode. A new finite element technique which...
An Innovative Connection Detail for High-Rise Buildings
Composite columns consisting of hollow steel tubes filled with high strength concrete have been used in high rise building construction in the USA and Far East Asian countries. The focus...
Seismic Design of Steel Beam-to-Box Column Connections
This paper is a study of the ductility requirements of steel beam-to-box column connections using the bolted beam web and welded beam flange details. Since the beam moment at the connection...
Behavior and Design of Angle Connections Subjected to Cyclic Axial Force and Shear
The objectives of this study were to establish cyclic behavior of double angle shear connections subjected to axial load and to develop design recommendations. Five cyclic tests of double...
Recent Successes in Welding Jumbo Shapes
A rather unique structure utilizing jumbo shapes was recently designed and fabricated. The structure was 100% welded according to the specifications for welding jumbo shapes recently developed...
Design of Monosymmetric Sections in Flexure
Monosymmetric members are generally I-shaped, symmetrical about the plane of the web, and characteristically have a larger compression flange than tension flange. Examples are crane girders...
Inelastic Behavior of Noncompact Steel Bridge Girders
This paper highlights the results from one of several finite element studies of the inelastic moment-rotation behavior of continuous-span non-compact bridge girders at interior-pier locations....
Composite Beams and Joists
Composite beams and joists used as flexural members in multistory steel-frame buildings are considered. Research results have shown that present design values for headed shear studs, used...
Interaction Between Beam and Steel Connections
The overall objective of the investigation is to study the behavior of a particular steel connection type, flush end plate steel connections, subjected to shear, axial forces, and possibly...
Design Property Values of Wood-Based Materials in LRFD Format
The development of a U.S. Load & Resistance Factored Design (LRFD) specification and supporting documents for engineered wood construction is nearing completion. The two key components...
Design of Connections in Wood Structures: LRFD vs. ASD
This paper provides a comparison of connection design capacities using load and resistance factor design (LRFD) procedures and allowable stress design (ASD) procedures....
Wood Diaphragm Design Capacities in LRFD Format
Wood diaphragms (horizontal and vertical) have performed well in resisting and transferring lateral forces imposed by major wind and seismic events. Resilient (ductile) behavior of wood...
System Factors in LRFD Format: A Multidimensional Judgment Call
A Load & Resistant Factor Design Specification for wood buildings is being completed. The Specification contains several revisions from the traditional 'repetitive member' factor...
Wood Bridge Design Using AASHTO LRFD Specifications
A nationwide project to develop a load and resistance factor (LRFD) design edition of the American Association of State Highway and Transportation Officials (AASHTO) Standard Specifications...
Simplified Reliability Analysis of Transmission Structures Including Both Geometric and Material Nonlinearities
Generally, in nonlinear structural systems, the g-functions of the components cannot be explicitly expressed in terms of the basic random variables. In using the design point method to...
Return to search