Pump Plant Control and Automation
Pumping plants for irrigation systems can be separated into two general types: source pumps which provide water to the system and booster pumps which increase the system pressure. Typically,...
Data and Control Communication Methods for Delivery System Operations
The selection of a communication system for the automation of a canal system requires careful consideration of the type of canal system operation desired, the location of the facilities...
Comparison of Some River Discharge Calculation Methods
To measure the discharge of a river, it is necessary to develop a stage-discharge curve based on water velocity at various cross sections of the river. This is the method which is used...
Modification of Meander Pattern Using Wing Dams
A sharp river bend and a highway bridge together create potentially hazardous conditions for all down-bound barge tows on the Mississippi River at Lansing, Iowa. The tendency of the river...
General Design for Modifications to Existing Lower Santa Ana Drop Structures
A model study conducted at the Waterways Experiment Station investigated the possibility of utilizing the existing drop structures of the Santa Ana River. Initial tests on selected existing...
Liberty Restored
The Outstanding Civil Engineering Achievement of 1987 is the restoration of the Statue of Liberty in New York Harbor. The restoration work included many engineering tasks that by themselves...
Building a Team, Not Just a Building
The best way to resolve construction disputes is to head them off. And the best time to step in is before your contractor is hired. In the private sector, there is no reason to open the...
Multi-purpose Stormwater Detention Facility Completed as First Phase of Englewood, Colorado, Flood Control Project
In 1980 the City of Englewood Urban Renewal Authority proceeded with planning for flood control improvements along Little Dry Creek. The selected plan includes capacity improvements for...
Dynamic Behavior of R/C Buildings in Vi? del Mar, Chile
The Chilean earthquake of 3 March 1985 resulted in an effective peak acceleration of 0. 36g in the coastal city of Vina del Mar. The city had an inventory of over 400 reinforced concrete...
Unusual Shaped Highrise Buildings in Seismic Zone
The structural concepts, seismic analysis and design of five recent highrise structures are presented in this paper. The paper deals with the problem of multistory buildings having 'structural...
The Design and Construction of the Washington State Convention and Trade Center Over Interstate 5
The Washington State Convention and Trade Center is a 10-level, 1,000,000-square foot facility constructed over Interstate 5 in downtown Seattle. The project spans over three city streets...
General Considerations for Seismic Stability
The basic design consideration is provision of sufficient stiffness, strength and adequate ductility for the varied loads imposed on the building. Adequate stiffness is needed to resist...
Code Designed Steel Frame Performance Characteristics
Three similar steel ductile moment-resisting frame structures designed in accordance to the Uniform Building Code (1976-1985) are evaluated for their performance characteristics during...
Uncertainties in Wind Loads Caused by Adjacent Buildings
Mean and fluctuating values of all three moment components caused by wind acting on small-scale models of tall prismatic buildings have been measured. Measurements were made in a boundary-layer...
Risk Assessment for Cladding Panels: An Expert Systems Approach
Risk assessment for structures in the context of wind engineering involves many factors such as wind hazard, the wind sensitivity of the structure and the socio-economic value of the structure....
The Risk of Progressive Collapse of Single-Story Buildings in Severe Storms
The probability of severe damage and progressive collapse of single-story commercial, institutional and residential buildings is examined. Observations of actual damage and the results...
Assessment & Control of Wind Created Risk During Construction
Structures under construction have been damaged by winds. The damaging winds, typically, are much lower than the design wind loads for completed structures. Little guidance is available...
Performance of Viscoelastic Dampers in World Trade Center Towers
The viscoelastic damper was conceived and developed as a part of the structural design for the Twin Towers of the World Trade Center, New York. They are an integral and an essential part...
Transient Response of Wind-Induced Internal Pressures in Buildings
The paper refers to a new experimental approach applied in a boundary layer wind tunnel experiment to test the transient response of the wind-induced internal pressure in a building when...
Measuring the Spatial Characteristics of Unsteady Pressures
This paper has reviewed current methods of determining spatially-averaged time-varying wind loads on wind tunnel building models. Some of the possibilities opened by simultaneous multi-channel...
Return to search