A Study on Non-Conforming Boundary Elements in Elastomechanics
This work is a critical study on the performance of non-conforming boundary elements in three-dimensional elastomechanics. The pervasive way of implementing the boundary element method...
3-D Flexible Embedded Machine Foundations by BEM and FEM
A study on the dynamic response of three-dimensional flexible massless foundations of arbitrary shape, embedded in a homogeneous, isotropic and linear elastic half-space and subjected...
Offshore Platforms Subjected to Wave Forces
The dynamic analyses of offshore platforms are mostly based on the lumped mass matrix method in the frequency domain. Although the approximations involved in the lumped mass matrix method...
Connection Panel Zone Deformation in Steel Frames
Conventional analyses of frameworks are usually carried out without considering the effect of panel zone deformation on frame behavior. As a result, center-to-center distances rather than...
The Effects of P-Delta and Semi-Rigid Connections on Response Behavior of Inelastic Steel Frames Subjected to Cyclic and Seismic Loadings
A numerical method is presented for analyzing semi-rigid connected steel frames subjected to various time-dependent excitations with consideration of damping, nonlinear material behavior...
The Ultimate High Tide
Unprecedented consumption of fossil fuels and clearing of vegetation have spurred interest in the greenhouse effect. Under this scenario, a build-up of carbon dioxide and other gases in...
Structural Applications of SIFCON
SIFCON (Slurry Infiltrated Fiber CONcrete) is a relatively new composite material utilizing steel fibers in a cement-based matrix. It differs from conventional steel-fiber-reinforced concrete...
Behavior of Concrete Bulkheads in Salt Drifts
Parameters studies of the behavior of a plug made from expansive concrete have been performed. Such plugs are now being field tested for sealing boreholes, shafts and drifts at an underground...
Avoiding Cracks in Brickwork
Many aspects of movement and differential movement have been discussed. However, other movements and effects of movement that have not been discussed may also affect the performance of...
Influence of Surface Conditions on Surface Temperature
Geotechnical engineers working in areas of discontinuous permafrost are frequently faced with the necessity of designing facilities with a minimum of thermal disturbance. Construction...
Nonlinear Analytical Models for Interfacial Plug Stresses in Creeping Salt Formation
Analytical and numerical simulation models are presented which predict the nonlinear time dependent behavior of an expanding plug in a creeping environment heavily dependent on the storage...
Design of Impact Limiters for Waste Fuel Shipping Casks
Impact limiters are often used to control the decelerations experienced by a waste fuel shipping cask when it is subjected to the hypothetical accident condition loadings. Simplified design...
A Mesh Generator for the Modeling of Rock Discontinuities
The need to characterize a rock mass by collecting field data is receiving more and more emphasis as larger, more ambitious underground structures are being built. Yet there is a need...
Geotechnical Data Acquisition and Computerized Analysis
In 1983 and 1984, an exploratory tunnel was constructed as part of the geotechnical exploration program for two highway tunnels to be constructed for the improvement of Interstate 70 through...
Effectiveness of Erosion Control
Erosion control in the urban environment is addressed from the perspective of the mechanisms of erosion. The primary cause of erosion in urban areas is flowing water. Measures are identified...
Super and Parallel Computers and Their Impact on Civil Engineering
This publication contains four papers on the use of super and parallel computers in the practice of civil engineering. The first paper shows how large nonlinear systems of equations, such...
Designing for Shock Resistance
If a product or structure is subject to shock loadings, and is unable to take them without unacceptable damage, it must be insulated from the shock. The decision may be to redesign the...
Research on Transportation Facilities in Cold Regions
Transportation facilities research in cold regions, reported in this session proceedings, begins with a field study showing that ground surface characteristics have a significant effect...
Frame Moments with the Takabeya Method
The Takabeya method of frame analysis, based on the same slope-deflection equations as the Hardy-Cross system, has the advantage of requiring much less memory and fewer computations than...
Concrete Quality Control and Quality Assurance on Strontia Springs Dam
An essential part of the construction management services provided on Strontia Springs Dam was the quality control of material, mixture proportions, and production for all concrete placed...
Return to search