Determination of Containment Vessel Ultimate Capacity Using Nonlinear Finite Element Analysis
Analysis of steel containment vessels is normally performed using linear elastic solutions with allowable stresses specified by applicable design codes. This method gives little indication...
ACI 349 Embedments: Code Provisions and Methods of Analysis
Steel embedments form the critical link between steel and concrete structures. Appendix B of ACT 349, Code Requirements for Nuclear Safety Related Concrete Structures, specifies the ultimate...
State-of-the-Art Report on Steel Embedments
The basic philosophy underlying the design of steel embedments may be summarized as follows: (1) If an attachment can be located such that a group of cast-in-place anchors can be used...
Importance of Pipe Soil Stiffness Ratio in Plastic Pipe Design
In this paper, the finite element method of analysis is used to study the effect of pipe-soil stiffness ratio on axial forces, bending moments, and deflection of pipes of varying stiffness....
The Present Status of Application of the Plastic Concepts in Structural Design
The different approaches of recognizing plastic behavior in the design of steel structures are reviewed and the design requirements that assure successful utilization of this behavior...
Computer-Automated Limit-States-Design of Steel Frameworks
The paper concerns the computer-automated synthesis of minimum-weight planar steel frameworks. For any number of applied loading cases, the design of the structure may be constrained by...
Limit State Analysis of Lattice Steel Transmission Towers
The background and present status for limit state analysis of lattice steel towers at the Bonneville Power Administration is presented. Conceptual development, a computer program, and...
Reliability-Based LRFD for Transmission Structures
A simple reliability-based Load and Resistance Factor Design (LRFD) method is proposed for the structural design of electric transmission lines. With the proposed method, the designer...
Pile Caps Subjected to Lateral Loads
This paper reviews current pile cap design practices and presents results of tests on two pile caps with different reinforcement locations. Lateral load tests performed on two pile cap...
Planning of CAE and CADD Centers
The factors to be considered prior to the establishment of computer aided engineering or computer aided design and drafting centers are discussed. It is noted that the critical issues...
Advanced Graphical CAD System for 3D Steel Frames
An innovative, advanced graphical computer-aided design system, called STEEL-3D, is described. The main objective of this program is to provide the engineer with all the tools necessary...
Influence of Connection Behavior on Steel Frame Designs at Factored Loads
This paper illustrates how interactive computer graphics, when interfaced with nonlinear inelastic frame analysis programs, can provide a powerful tool for design of semi-rigid frames...
Hydrotest Rupture of Penstuck Liner at Bath County
Bath County is the construction site of Virginia Electric and Power Company's pumped storage project. Rupture of a penstock liner during hydrotest at high pressure threatened...
River Basin Management: Role of Hydraulics and Hydrology
One of the major Illinois rivers originates in a neighboring state. The main stem of the river was channelized about 65 years ago, and is considered to be a 'drainage ditch....
Computer Aided Design in Civil Engineering
Increased application of computer aided design and drafting encouraged the organization of the symposium from which this book was derived. The papers presented at the symposium and included...
Geotechnically Allowable Stress for Driven Piles
There are opposing opinions on what value to use for allowable stress in driven steel piles. The key is that two types of stress must be considered: the structurally allowable stress,...
High Tech Is More Than a Look
Hollow steel section, also known as tubular steel, is being used for its clean dramatic look, its structural efficiency in compression, the economic efficiency of combining structure and...
Structural Trends in New York City Buildings
This story is based on interviews with some leading structural engineers in New York City. It highlights the major structural trends in building design in that city. Case histories of...
Lightweight Fill Helps Albany Port Expand
Lightweight aggregate was used as a soil fill in the reclamation of a marine terminal at the Port of Albany, New York in order to stabilize the dockside area. Gravel-filled steel sheet...
Brooklyn Bridge
To commemorate the 100th anniversary of opening of New York City's Brooklyn Bridge in 1883, the Smithsonian Institute has mounted, and opened to the public in the anniversary...
Return to search