Strain Rate Effects on Pressuremeter Testing
This paper discusses the effect of strain rate on the cavity expansion problem and pressuremeter test. A cuboidal shear device, CSD, was used to perform pressuremeter strain path tests...
Influence of Finite Deformations in the Stress-Strain Modelling of Granular Media
An incremental formulations of the stress-strain law is presented for quasi-static deformation of granular solids. The stress-strain relationship is derived for an element of granular...
Constitutive Relations for Large Deformation Plasticity
Influence of the choice of measures of stress and deformation upon the representation of constitutive relations for elasto-plastic solids undergoing finite deformation is discussed. The...
A Micromechanics Model for Rough Interfaces
A new constitutive model for transfer of interfacial tractions along rough cracks in strain softening composites is presented. The model relates the normal and shearing stresses on the...
Penetration Tests in a Particulate Calibration Chamber
A numerical technique which couples discrete element method with boundary element method has been developed to simulate a two dimensional particulate assembly. Soil particles in the near...
Comparison of a Microscopic Model and a Macroscopic Model Predictions on the Stress-Strain Behavior of a Soil
The stress-strain behavior of a soil under drained triaxial conditions was simulated using the Microscopic constitutive model TRUBAL. The model parameters for the Macroscopic constitutive...
Constitutive Relations for Granular Solids Accounting for Heterogeneous Deformation Fields
Under high deviatoric stress levels corresponding to large strains, the deformation of granular media is highly heterogeneous. A micro-mechanical approach is developed here to model the...
Numerical Undrained Cyclic Loading Simulations Using the Discrete Element Method
Three dimensional numerical experiments on random arrays of rough spheres were performed using the discrete element method to study the behavior of granular soil and the results were compared...
Numerical Experiments for Anisotropic Behavior of Granular Materials
A three dimensional discrete element computer code 'TRUBAL' is used to investigate the effect of initial anisotropy on stress-strain and volume change characteristics...
An Inexpensive Automatic Control System for Soil Testing
This paper describes an inexpensive automatic control system for soils testing. The system comprises a microcomputer, an analog to digital converter, a relay board, and solenoid valves....
An Energy Approach to the Analysis of Partially-Saturated Flow
When fluid passes into or out of an aquifer, work is done at the boundaries which is partly used to change the internal energy of the system and partly to overcome resistance to flow....
Performance of Pipelines During Soil Liquefaction
This paper presents the behavior of buried pipelines during soil liquefaction through reconnaissance work after the 1989 Loma Prieta Earthquake and response analysis based on a beam theory....
Applications of Strain and Deflection Monitoring Systems for Post-Earthquake Safety and Usability of Lifelines
The paper proposes and discusses a variety of strain and deflection monitoring devices and systems for post-earthquake safety evaluation of lifelines. There is clearly a need, both in...
Influence of Rigidity of Soil Surrounding Shield Tunnel Upon Equivalent Rigidity of the Tunnel in Axial Direction
The purpose of this study is to investigate the interaction between ground surrounding a shield-driven tunnel and segments, especially their ring-joint portion. When a seismic force acts...
Pipeline Field Experiment at Parkfield, CA
A field experiment designed to investigate the performance of buried pipelines at a fault crossing has been constructed near Parkfield, CA. The site was chosen to capitalize on the predicted...
Stochastic Strain-Displacement Matrices for Finite Elements with Random Constitution
A prescribed correlated random field for elastic moduli furnishes an associated population of stochastic shape functions at the element level. The principle of deterministic tractions,...
Reliability-Oriented Materials Design of Composite Materials
A basic formulation for evaluating safety index of unidirectional fiber reinforced laminate is presented. The proposed formulation is based on in-plane failure criteria of composite laminate...
Earth Pressure Acting on Buried Flexible Pipes in Centrifuged Models
Distributions of both normal and tangential earth pressures acting on three flexible model pipes having different wall thicknesses were successfully measured in centrifuge model tests....
Prestressed Concrete Pipe Field Test
Strain changes in the prestressing wires and deflections of a 2130-mm-diameter precast (embedded cylinder), prestressed concrete pipe were measured during earth backfilling operations....
Buried Structural Capacity of Insituform?
In July 1988, a test was conducted at Utah State University to determine the structural support that can be provided to a failing rigid pipe system through the use of the Insituform process....
Return to search