ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Comparison of Predicted Far-Field Temperatures for Discrete and Smeared Heat Sources
A fundamental concern in the design of the potential repository at Yucca Mountain, Nevada is the response of the host rock to the emplacement of heat-generating waste. The thermal perturbation...

Field Investigation of Mining-Induced Seismicity on Local Geohydrology
Hydraulic response of the rock mass due to earthquakes is one of the concerns in the assessment of the long-term performance of a repository. Studies performed by other researchers indicated...

Influence of Deterministic Geologic Trends on Spatial Variability of Hydrologic Properties in Volcanic Tuff
Hydrologic properties have been measured on outcrop samples taken from a detailed, two-dimensional grid covering a 1.4 km outcrop exposure of the 10-m thick nonwelded-to-welded, shardy...

Rock Mass Mechanical Property Estimation Strategy for the Yucca Mountain Site Characterization Project
Rock mass mechanical properties are required in the design of repository drifts and ramps to assess the impact of thermal loads from the heat-generating wastes on excavation performance...

Estimation of Water-Filled and Air-Filled Porosity in the Unsaturated Zone, Yucca Mountain, Nevada
The responses of density and dielectric logs are formulated in terms if the matrix properties, air-filled porosity and water-filled porosity. Porosity values obtained from logs from borehole...

Single-Hole in Situ Thermal Probe for Hydrothermal Characterization at Yucca Mountain
The REKA thermal probe method, which uses a single borehole to measure in situ rock thermophysical properties and provides for efficient and low-cost site characterization, is analyzed...

Scale Dependence of Effective Media Properties
For problems where media properties are measured at one scale and applied at another, scaling laws or models must be used in order to define effective properties at the scale of interest....

Full-Field Dye Concentration Measurement Within Saturated/Unsaturated Thin Slabs of Porous Media
This paper presents a full-field dye concentration measurement technique that extends our experimental capabilities to the measurement of transient dye concentration fields within steady...

Effect of Interconnection of Fractures on Dispersion in Flow Through Fractured Networks
A stochastic modeling technique in a 2-D discrete fracture network with two orthogonal sets of fractures is developed to investigate mass transport dispersion and to investigate the relation...

Modeling Storage Behavior in a Fractured Rock Mass
To represent single bore hole injection tests in fractured rock masses, a transient model has been implemented, based on a three dimensional stochastic description of the fracture network....

Modeling of Fluid and Solute Transport in Fractured Rock
A new model for flow and solute transport in fractured rock is proposed. It is based on the concept of a network of channels. The individual channel members are given stochastically selected...

Channel Network Models for Solute Migration and Dispersal
We introduce a class of channel-network models for solute migration and dispersal in saturated rock. In discussing the behaviour of any dispersive process it is necessary to compare and...

Solute Transport Characteristics of Fractured Dolomite in Southern Nevada, USA
Recirculating tracer tests in fractured Cambrian dolomite beneath the Amargosa Desert revealed (1) and 83-percent increased in apparent dispersivity resulting from a two-percent increase...

Radionuclide Transport in Fractured Media
Until recently, the classical advective-dispersive transport equation was considered to be an adequate model for describing the motion of a solute (e.g. radionuclides) in porous and fractured...

Summary of Revised Potentiometric-Surface Map for Yucca Mountain and Vicinity, Nevada
The revised map for the potentiometric surface of the uppermost saturated zone in Tertiary volcanic rocks at Yucca Mountain, Nevada, is based mainly on 1988 water levels. Refinement of...

Isotopic Evidence of Complex Ground-Water Flow at Yucca Mountain, Nevada, USA
Strontium isotopes (expressed as per mill deviation from mean sea water, ?⁸⁷Sr) reflect interaction between ground water and the aquifer through...

Development of the Office of Civilian Radioactive Waste Management's Self-Assessment Program
This paper describes the development and implementation of the Self-Assessment (SA) Program of the Office of Civilian Radioactive Waste Management (RW). The basis for RW's SA program is...

Characterization of Porosity in Support of Mechanical Property Analysis
Previous laboratory investigations of tuff have shown that porosity has a dominant, general effect on mechanical properties. As a result, it is very important for the interpretation of...

Core and Reaming Bit Studies in Yucca Mountain Tuffs
The Site Characterization Project is a major part of the work in determining the suitability of Yucca Mountain as a potential high level waste repository. Over 100 exploratory drill holes...

Isotopic and Trace Element Variability in Altered and Unaltered Tuffs at Yucca Mountain, Nevada
Reference stratigraphic sections near Yucca Mountain, Nevada were established and sampled in outcrop areas where the volcanic rocks have been minimally altered. Isotopic and trace element...

 

 

 

 

Return to search