A Comparison of Propulsion Systems for Space Exploration
There are three promising propulsion systems that might be used for space missions: chemical, direct nuclear, and nuclear electric. Selecting the best system for a mission involves comparing...
JSC-1: A New Lunar Soil Simulant
A new lunar soil simulant, JSC-1, has been developed and characterized under the auspices of the NASA Johnson Space Center. This simulant was produced in large quantities to satisfy the...
Mineral Liberation and Beneficiation of Lunar High-Ti Mare Basalt, 71055: Digital-Imaging Analyses
Knowledge of the abundance of various lunar minerals and the ability to effectively beneficiate thee minerals are important requirements for effective utilization of lunar resources. SEM/EMP...
Effects of Dust and Thermal Cycling on Telescope Mirror Performance
In this study, 1 cm ? 1 cm square optical-grade aluminized glass mirrors were measured for maximum light reflectance and then the loss of reflectance due to the presence of different specific...
Kinetic Interpretations of First Reactivity Experiments on Lunar Basalt Samples
For the first time, water/oxygen production from Apollo program lunar samples has been experimentally demonstrated. The experiments gave extremely encouraging results as all ilmenite was...
Lunar Oxygen Production in a Hydrogen Cold Plasma
This paper examines the concept of oxygen production from unbeneficiated lunar regolith using a non-equilibrium or 'cold' hydrogen plasma. An experimental investigation has indicated that...
Fiber Optic Chemical Sensors on Mars
A fiber optic chemical sensing instrument is described that will measure the reactivity of the martian soil and atmosphere. The self-contained instrument monitors reflectivity changes...
Transfer Vehicle Sizing for Missions to Mars
The purpose of this study is to analyze the interactions between mission and vehicle design parameters, and determine how the selection of a particular trajectory and transit time affects...
Safety Assessment of a Chemical Reactor Vessel
The potential explosion loadings on a chemical reactor vessel is described in this paper. The potential loads presented provide a basis for designing spherical storage vessels which will...
Evaluation of Corroded Steel Chimneys
The paper is focused on the analysis of corroded steel chimneys. Cylindrical steel plates are exposed to thermal and chemical effects. The study is based on the results of extensive measurements...
Damage Tolerance Analysis in Structural Rehabilitation
The rehabilitation of existing structures requires an evaluation by the structural engineer of past performance to determine the extent of existing damage. Following evaluation of the...
Design, Construction, and Maintenance of Relief Wells
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 3 This engineering manual provides guidance and information...
Environment-Friendly Deicing/Anti-Icing Fluid
NASA Ames has formulated a unique candidate non-glycol based freezing point depressant (FPD) fluid material that performs essentially the same or superior to currently used glycol based...
Removal Of Chromium From Groundwater Using Permeable Barriers: An Aquifer Simulation Study
Previous efforts to remediate groundwater contaminated by chromium-bearing industrial wastes have involved post-extraction methods, whereby groundwater is pumped to the surface treated...
Impacts of Natural and Manmade Changes on the San Luis Rey River Environment
Almost all rivers continually change their position and shape based on various geomorphic and hydraulic factors, caused by natural as well as manmade activities on the riverine environment....
Building Groundwater Optimizers That Respond to the Needs of Decision-Makers
Optimization methods are being sought and employed to design systems that remediate contaminated groundwater regions (and, in fact, the subsurface in general) with increasing frequency....
A Physically Based Conceptual Model for Simulating Contaminant Levels in Subsurface Water
A conceptual physical model is developed to simulate solute transport and mixing in the vadose (unsaturated) and groundwater zones. The conceptual model couples lumped-parameters models...
Partnering in Environmental Restoration: The Coastal America Model
The Coastal America Partnership was initiated in 1993 with the underlying principal that collaborative efforts would be more successful than attempting individual agency solutions. To...
Plate and Frame Membrane Air Stripping
This paper examines utilization of a plate and frame membrane air stripping system for the removal of volatile organic chemicals (VOCs) and radon from a water supply. Previous work explored...
An Integrated Approach to the Real-Time Control of Water Supply and Distribution Systems
In recent years, real-time automated operation and control schemes have been implemented for a number of water supply and distribution systems with varying degrees of success. This paper...
Return to search