Selective Withdrawal in a Rotating Stratified Fluid
In this paper we consider the axisymmetric flow of a rotating stratified fluid into a point sink. Linear analysis of the initial value problem of flow of a linearly stratified fluid into...
Application of Environmental Regulations on Design of Hydraulic Structures for Open Cooling Water System
Design of intake and discharge structures for an open cooling water system for a thermal power plant requires that the design of hydraulic structures meets the federal, state, and local...
Two Options for Disposal of Desalination Reject Water
A major problem associated with the use of desalination plants for the production of fresh water is the disposal of the reject water. This water is typically double the salinity of the...
Thermal Shielding in Continuous Span Composite Slabs
The increasing popularity in Europe of composite slabs with cold-formed steel decking has underscored the need to improve calculation rules for the fire resistance. Existing rules have...
How SHRP Reliably Predicts Pavement Performance
One of the important results of the SHRP Asphalt Research Program was to develop a comprehensive pavement performance model that reliably predicts rutting, fatigue cracking and thermal...
SHRP Deformation Test?Asphalt Mix Tests and Analysis Systems
From analyses of existing information on the permanent-deformation characteristics of asphalt/binder-aggregate mixes, as well as the development of permanent deformation in pavement structures,...
Characterization of Man-Made Vitreous Fibers by Image Analysis
This paper deals with the characterization of man-made vitreous fibers (MMVF), seen as an application of the techniques of image analysis and mathematical morphology. We present the whole...
Radiographic Visualization in Experimental Soil Mechanics
A summary of the principles of such methods is presented, i.e. stereophotogrammetry, infrared thermography and radiography and their respective ranges of applicability are discussed. Then,...
Mechanistic Design Models of Loading and Curling in Concrete Pavements
Determination of the critical bending stress at the edge of a concrete pavement due to individual and combination effects of wheel loading and thermal curling is very crucial to any mechanistic...
Mathematical Modeling of Airport Pavements
Theories for analyzing rigid pavements are presented. The emphasis is on the choice of the proper models for the pavement and for the subgrade, and on the correct mathematical formulation...
Durability of Asphalt Mixture
Five asphalts were used in a laboratory testing program to establish a relationship between mixture properties and the binder properties. These five asphalts were used to make Florida...
Behavior of Urugua-I Dam
URUGUA-I with its 76 m height is one of the higher lean roller compacted concrete dams. The project includes some outstanding features like the very low cement content and a PVC membrane...
Thermal Analysis for RCC?A Practical Approach
Roller compacted concrete (RCC) structures, by nature of the construction method, tend to be monolithic structures or structures with minimal contraction jointing. Recurring questions...
Thermal-Structural Analysis Methods for RCC Dams
Current procedures for evaluating temperature control and the placement of contraction joints in roller compacted concrete dams are not always evaluated with the aid of detailed analysis...
Damage Dependent Micromechanics in Metal Matrix Composites
A computational approach is used herein to model the effects of processing induced thermal residual stresses on radial, hoop, and shear stresses at the fiber/matrix interface in a continuous...
Size, Temperature and Rate Effects on the Fracture Toughness of Saline Ice
This paper presents the results of an extensive experimental study performed with the aim of investigating the effects of temperature, size and loading rate on the fracture toughness of...
Three-Dimensional Thermal Jump in Stratified Cooling Channel
This study is concerned with basic properties of three-dimensional thermal jumps. Temperature measurements obtained in three-dimensional thermal jumps are presented. The jumps analyzed...
General Mechanism of Turbulence
By considering the vortex structures of turbulence and using the concept and theory of the pulsative convection and diffusion of instantaneous vorticity in a viscous fluid motion, the...
On the Modelling of Damage Due to Volumic Variations in Cementitious Composites
Two kinds of volumic variations are considered. Those due to thermal gradients on hardened concrete and those due to hydration processes at early ages. Models based on damage mechanics...
Unconfined Granular Materials Thermalized by Fluctuating Horizontal Surfaces
We calculate the solid fraction and granular temperature throughout assemblies of identical, smooth, inelastic spheres that are unconfined from above and thermalized from below by bumpy,...
Return to search