ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

The Method of Lines Solution of Unsteady Open Channel Flow Equations Along Characteristics
The method of characteristics (MOC) has long been considered as a natural procedure for solving transient flow problems. In this paper, by using the concept of the method of lines, the...

Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...

Computational Open-Channel Hydraulics for Movable-Bed Problems
As a major branch of computational hydraulics, notable advances have been made in numerical modeling of unsteady open-channel flow since the beginning of the computer age. According to...

Urban Soft Bottom Low Flow Channel?A New Approach
In 1987, the City of Boulder, Colorado requested assistance from the Urban Drainage and Flood Control District (District) to repair an all too familiar problem of cattails growing in the...

The Effect of Aeration on Scour
A vertical water jet was used to study the effects of entrained air, tailwater depth, size of bed material, jet diameter, and jet velocity on scour. Small amounts of entrained air were...

A Multimode Scheme of Characteristic Method for Open Channel Flows
This paper deals with the stability and accuracy of a multimode scheme, based on the method of characteristics, for unsteady one-dimensional open-channels flows. This scheme combines three...

Hermite-Galerkin Model for Dam-Break Floods
A model based on the finite element method using cubic Hermite basis functions and Galerkin weighting was formulated to solve the partial differential equations that govern unsteady one-dimensional...

Diffusion Wave Overland Flow Module
This paper documents the diffusion-wave overland flow module contained in the FORTRAN-callable routine OVERLAND. Subjects covered include the theoretical background, model formulation,...

The Calculation of Flushing Flows for Gravel and Cobble Bed Rivers
Flushing flows are needed to remove fines and sand from a gravel or cobble bed river. A natural stream will have periodic high flows adequate for flushing of fines and sand, but the hydraulic...

Flow Field Near an Inland Navigation Tow
As a vessel moves through a body of water, disturbances are created in the form of altered water levels such as waves or drawdown and altered flow fields such as increased velocities and...

Prototype Measurements of Flows Induced by Navigation Tows
Present projections of growth of commerical navigation traffic indicate that annual tonnage per tow and/or number of tows will continue to increase through the foreseeable future. In order...

The Equivalence of Path and Node Methods for Water Distribution Network Analysis
This paper deals with the equivalence between commonly employed methods, path and node adjustment methods, for analyzing water distribution networks. The basic equations for steady-state...

Hydraulic Analysis for the Shot Tower Subway Station Beneath the Jones Falls
The objective of the hydraulic analysis is the formulation of a strategy to safely accommodate the construction of the Shot Tower Metro Station beneath the existing Jones Falls. The hydraulic...

Secondary-Flow Correction for Depth-Averaged Numerical Models
An empirical equation is proposed for the production and transport of secondary (streamwise) vorticity induced by lateral curvature in shallow water. The streamwise vorticity creates a...

Application of Weakly Compressible Flow Method to 2-D Open Channel Flows
The depth averaged equations for open channel flows are shown to be similar to that of the weakly compressible flows. The finite volume scheme developed for weakly compressible flows has...

Numerical Computation of Free Surface Weir Flow Using Isoparametric Finite Elements
Numerical computation of flows with a free surface boundary involves three problems in one: the internal flow problem, location of the free surface and the actual flow rate. The development...

Model Study to Design a Small Intake
A 1:4 scale model was used to design the make-up water intake structure for Burrillville Combined-Cycle Power Plant, Ocean State Power Project. The objective of the study was to assure...

Characteristics of Flow Pressure Pulsation and Similitude Law of Model
As described in this paper, the characteristics of flow pressure pulsation and similitude law of model are derived from experiments on some prototype dam and serial scales models....

Numerical Modeling of Irregular Hydraulic Jumps
In its simplest form a hydraulic jump characterized by an abrupt increase in the water surface elevation from a depth less than the critical depth, D_c,...

Solving Turbulent Flows with Finite Elements
A finite element computer code using the q - r turbulence model is applied to turbulent flow under a sluice gate. The addition and slow removal of artificial diffusion enhances convergence....

 

 

 

 

Return to search