Retrofitting a Detention Facility for Improved Quantity Control
Historically, detention facilities in the U.S. were first designed, constructed and operated for the single purpose of flood control. This led to a second phase, in which recreation and...
The Computer-Assisted Design of Multi-Ponds in Series for Stormwater Management
When a site's topography prohibits the installation of a single stormwater management pond, the drainage system can be integrated with multi-ponds in series. A computer program written...
Sacramento Drainage Manual?Hydrologic Procedures
For a period of over two years, HDR Engineering, Inc. (HDR) and HYDMET have been working with the City and County of Sacramento to develop a Drainage Manual. This Manual contains seven...
Sacramento Hydrologic Procedures Interim Adoption
In November 1989, the County and City of Sacramento jointly undertook the development of a manual for the design of drainage and flood control facilities in the region. Significant technical...
A Frost Protection Design for Fruit Trees in Southwest Colorado
The project explores the feasibility of producing commercial quantities of fruit in the high and arid environment of Southwestern Colorado by using low-volume water delivery systems for...
Computerized Irrigation Project Earthwork Design
A procedure was developed to perform earthwork optimization and land-leveling design for irrigation projects using aerial photogrammetry, a microcomputer and civil engineering computer...
Overland Flow Resistance Estimation from Small-Plot Data
The correct application of physical process models, such as the kinetic wave approximation to shallow overland flow, is dependent upon selection of appropriate values for parameters which...
Design and Management of Evaporation Ponds
The evaporation ponds in use in the San Joaquin Valley were designed and constructed to dispose of agricultural drainage water in a region of low soil permeability and high water table....
IRRICAD ? Computerized Irrigation Design
IRRICAD is a software program that helps irrigation designers by using a computerized systems approach to design. The program features drawing CAD input, interpolation of elevation data,...
FLUME 3.0: A Computer Program for Designing Flumes and Weirs
Long-throated flumes and broad-crested weirs are becoming the preferred measuring devices for use in irrigation canals. A computer program for calibrating these flumes and weirs has been...
BASIN 2.0 for the Design of Level-Basin Irrigation Systems
The purpose of this paper is to present a computer program for the hydraulic design of level-basin irrigation systems. The first of three design modes provides design based on the advance...
CPIVOT v 2.0 Center Pivot Analysis and Design Software
A micro-computer based software package is presented which can be used for hydraulic design and/or analysis of center pivot irrigation systems. The software is written in C and requires...
Flow Simulation for Surface Irrigation Design
Experience shows that even the most sophisticated and accurate computer models of the surface-irrigation process will not be widely used by design agencies unless they manifest a certain...
Short-Span Bridge Solutions
Large bridges get most of the headlines, but the nation's huge network of small bridges (many with spans of less than 25 ft) may be more in need of replacement. Age, corrosion,...
OCEA Goes Green
While spanning the range of civil engineering work, most of the nominees for this year's Outstanding Civil Engineering Achievement Award were either designed to clean the...
Closing the Loop
The 5.1 mi Cooper River Bridge, the longest in South Carolina, completes the I 526 Mark Clark Expressway around Charleston. It is a two-way, four-lane structure with the capability of...
Designing Self-Cleaning Wet Wells for Wastewater Pumping
Guidelines for the design of self-cleaning wet wells for variable speed pumps are given. The progress of research on the design of wet wells for constant speed pumps, including submersible...
Disaster Reduction in Dam and Reservoir Design
Disaster reduction for small- and medium-sized reservoir projects is considered for two specific types of dam failure: 1) during extremely high floods, and 2) when severe reservoir silting...
The Coyote Dam Outlet Works Replacement Project: Hazard Reduction
The Santa Clara Valley Water District's Coyote Dam faced three major concerns: siltation of the existing outlet; a fault that crosses the existing outlet pipe; and the dam toe and the...
Hydraulic Performance of Culvert End Sections Designed for Collision Safety
A type of end section for pipe culverts that was designed for collision safety has some favorable hydraulic characteristics. These safety end sections are long and narrow with large steel...
Return to search