A 2-D Numerical Model for High Velocity Channels
The hydraulic performance of a high velocity channel depends on maintaining a supercritical flow regime over specified portions of its length. Predicting the potential location of shocks...
Multi Objective Detention Outlet Control Structure
Increasing numbers of stormwater management ponds are being included in the design of urban and rural drainage projects. This is in part due to the environmental outcry to clean up our...
Low-Flow Habitat in Flood Control Channels
A critical phase in the life cycle of many riverine species in flood control channels is during low-flow periods when the quantity and quality of available habitat diminishes. However,...
Scour at Highway Structures in Tidal Waters
Scour analysis of bridges over tidal waterways uses the same scour equations as for the rivers. However, determining the hydraulic variables to use in the equations is complex. A major...
Bridge Hydraulic Design in Tidal Situations
The analysis of bridge hydraulics and scour potential in tidal waters, in comparison with inland rivers, requires consideration of various additional factors. This paper condenses a simplistic...
Two-Dimensional Hydrodynamic Modeling with a Computer Graphics System
For more than a decade various divisions and district offices of the U.S. Army Corps of Engineers have been active in the development of graphic information system databases and computer...
Fish Screen Developments, Columbia River Dams
This paper describes developments to date for a fish diversion and bypass system being tested for two Columbia River dams. Because of the concern for the negative impacts of screen systems...
Hydraulic Aspects of a Low-Velocity, Inclined Fish Screen
The Potter Valley Hydroelectric Project diverts up to 310 cfs from Van Arsdale Reservoir on the Eel River in north-central California and delivers it to Potter Valley for power production...
Flow Resistance Properties of Flexible Linings
Flow resistance for flexible channel linings is a function of the relative roughness of the lining in accordance with boundary-layer principles. As with vegetation, flexible linings have...
Hydraulic Modeling of High Unit Discharge Energy Dissipators
The incorporation of an efficient and economical energy dissipation device is critical with respect to the safe operation of a high unit discharge spillway. The development and design...
Model Study of Center Hill Fuse Plug Spillway
Model tests of a fuseplug spillway mounted on the fixed crest of an embankment dam were conducted to develop a satisfactory design that would fail in a orderly fashion at a prescribed...
Riprap Design at Bridges?Factor of Safety Approach
The factor of safety method offers a physically based methodology for design of riprap that relates the applied shear stress on the channel boundary to the stability of the riprap layer....
Scour Retrofit Case Studies for Arizona
Scour retrofit involves a coordinated analysis and joint determination of action by several engineering disciplines: typically, geotechnical, hydraulic and structural engineering. The...
Distorted Physical Models for Mixing Studies
The frictional resistance and mixing process affected by roughness bars are investigated. Specific combinations of the size and layout of the bars for various flow conditions are suggested...
Determination of Pulsating Pressures for Baldhill Dam, N.D. Spillway
Model tests of the existing Baldhill Spillway were conducted with symmetrical and asymmetrical gate openings to determine for various flow conditions the characteristics of the hydraulic...
Innovations and Practical Procedures for Hydraulic Model Applications in Bridge Scour Evaluations
Procedures for data conversion, and establishment of downstream boundary conditions for a hydraulic computer model for estimation of riverbed scour at bridges are presented. The data conversion...
Practical Comparison of One-Dimensional and Two-Dimensional Hydraulic Analyses for Bridge Scour
The Kentucky Transportation Cabinet, Department of Highways is working with the Indiana Department of Transportation and the Federal Highway Administration to plan, design, and construct...
Hydraulic Modeling and Mapping of Mud and Debris Flows
The prediction of hyperconcentrated sediment flows on alluvial fans was advanced through the development of a two-dimensional, finite difference flood routing model FLO-2D. The model simulates...
Design of a Curved Baffle Energy Dissipation Structure
A curved baffle energy dissipation structure was designed and constructed based on the results of hydraulic and analytical models. Field tests of the prototype demonstrate close comparison...
A New Type of Concrete Trapezoid Dam
A new type of 128.0 m height concrete trapezoid dam (t-d) has been built for the Wunana Town Hydroelectric Power Station (WTHPS). The paper presents its optimum section design, several...
Return to search