Models for Simulating Hydrology and Water Quality on Drained Soils
Design and operation of drainage and related water management systems should consider both agricultural production and environmental impacts. This is currently required in many locations...
Testing Outlet Works Gates and Valves at USBR Dams Under Unbalanced-Head Conditions: Tieton Dam Unbalanced-Head Gate Test
The Tieton Dam outlet works installation geometry is the most common type used in U.S. Bureau of Reclamation (USBR) earthfill dams. An emergency guard gate is located in a gate chamber...
Testing Outlet Works Gates and Valves at USBR Dams Under Unbalanced Head Conditions: Close-coupled Guard and Regulating Gates at Yellowtail and Flaming Gorge Dam
Part of the U.S. Bureau of Reclamation (USBR) program for unbalanced testing of outlet works guard gates and valves at its dams involves testing facilities with 'close-coupled' guard and...
Furrow Irrigation Education
A furrow irrigation simulation computer model based on the volume-balance method is described. The model is used to develop information on furrow system performance that can be used in...
Optimal Commands in Border Irrigation Systems
Optimal command areas and level border irrigation design parameters are obtained for a given available seasonal water supply using a dynamic programming (DP) optimization approach. The...
IRRICAD ? Computerized Irrigation Design
IRRICAD is a software program that helps irrigation designers by using a computerized systems approach to design. The program features drawing CAD input, interpolation of elevation data,...
An Irrigation Allocation Planning Model
An irrigation allocation model using multiperiod linear programming was developed to recommend canal water allocation among different irrigated fields to maximize net annual benefits for...
A Flexible Expert System Based Typology of Irrigation System Types
This paper describes an approach developed to classify irrigation systems into categories. It discusses the general problem of developing a typology of irrigation systems and proposes...
Development of a Hydrological Database for PROSIM?A Water Rights-Based Operational Simulation Model of the Provo River
The development of a hydrological database for a computer model of the hydrology, water rights, and operations of the Provo and Weber rivers is described. The model uses all pertinent...
FLUME 3.0: A Computer Program for Designing Flumes and Weirs
Long-throated flumes and broad-crested weirs are becoming the preferred measuring devices for use in irrigation canals. A computer program for calibrating these flumes and weirs has been...
CPIVOT v 2.0 Center Pivot Analysis and Design Software
A micro-computer based software package is presented which can be used for hydraulic design and/or analysis of center pivot irrigation systems. The software is written in C and requires...
Flow Simulation for Surface Irrigation Design
Experience shows that even the most sophisticated and accurate computer models of the surface-irrigation process will not be widely used by design agencies unless they manifest a certain...
Software Engineering for Irrigation and Environmental Applications
Interactive, user-oriented software has been developed to enhance irrigation design, management and planning. Environmental applications were the central focus of several individual components...
Radiation Balance and Soil Water Evaporation of Bare Pullman Clay Loam Soil
Radiation and energy balance components and soil water evaporation were measured for a bare Pullman clay loam soil at Bushland, TX during the 1992 spring and summer as the soil dried following...
Revision of Oregon Crop Water Use and Irrigation Requirements
A project to revise the crop water use estimates and irrigation requirements for the state at Oregon is described. The FAO modified Blaney-Criddle method was applied in this project since...
Computing in Civil and Building Engineering
This proceeding consists of papers presented at the Fifth International Conference on Computing in Civil and Building Engineering held in Anaheim, California, June 7-9, 1993. The proceedings...
Computer Scheduling and Construction Specs
As recently as the early 1980s, employing computers in critical path method (CPM) scheduling was a formidable decision demanding considerable commitment of time and resources by management....
Establishing a Drought Reserve Policy for the Monterey Peninsula Water Management District
The Monterey Peninsula Water Management District was created by the California Legislature in 1977 for the purpose of developing an integrated management program for all of the water resources...
The Influence of Slope and Surface Roughness on Trapezoidal Free Overfall Characteristics
The brink depth-discharge relationship for trapezoidal free overfalls was investigated including the effects of slope and roughness. The theoretical relationship is based on the momentum...
Optimization Modeling for Sedimentation in Alluvial Rivers Considering Uncertainties
A nonlinear optimization model is formulated for determining optimal reservoir releases to minimize channel bed aggradation and degradation in downstream rivers. The model is based upon...
Return to search