Advanced Composites Materials in Civil Engineering Structures
This proceedings of the Specialty Conference on Advanced Composites Materials in Civil Engineering held in Las Vegas on January 31?February 1, 1991 contains 40 papers from ten technical...
Cold Regions Engineering
This proceedings consists of papers presented at the Cold Regions Engineering Specialty Conference held in West Lebanon, New Hampshire from February 26-28, 1991. The papers cover nine...
Dallas' Flood Caverns
Dallas' North Central Expressway floods during heavy rains, but the dense development that helps create excessive runoff also precludes large detention ponds. The high-quality,...
Effects of Heterogeneity on Actinide Diffusion Rates in Tuffaceous Rock
The pore structure and mineralogy of Topopah Spring Tuff are heterogeneous on scales less than one cm. This heterogeneity creates spatial variation in transport rates for aqueous actinide...
Strain Distribution in Fault Zones and Fluid Flow
Field and laboratory studies have shown that mechanical shearing in fault zones produces a repeatable fabric that changes with increasing shear strain. In the brittle field of mechanical...
Computer-Assisted Geometric and Kinematic Analysis of Subsurface Faulting in the Vicinity of Yucca Mountain, Nevada, Using Balanced Geologic Cross Sections
Computer-assisted geological cross section balancing methods are used in the geometric and kinematic analysis of subsurface structures in the vicinity of Yucca Mountain, Nevada, including...
Mechanical Anisotropy of the Yucca Mountain Tuffs
Three series of measurements were performed on oriented cores of several Yucca Mountain tuffs to determine the importance of mechanical anisotropy in the intact rock. Outcrop and drillhole...
Fractal Characteristics of Fracture Roughness and Aperture Data
In this study mathematical expressions are developed for the characteristics of apertures between rough surfaces. It shown that the correlation between the opposite surfaces influences...
Effect of Material Heterogeneities on Flow Through Porous Media
Modeling studies were conducted to determine the effects of material heterogeneities on the flow of water through rock. Multiple numerical calculations were made using random variations...
A Probe Method for Measuring In Situ Rock Thermophysical Properties
The application of a thermal probe method for in situ thermophysical property measurement is analyzed. The REKA method (Rapid Evaluation of k and alpha) involves a single-borehole probe...
Correlation of Hydraulic Conductivity and Sonic Velocity in Water-Saturated Tuff
A laboratory study was conducted to investigate the correlation of hydraulic and sonic properties of water-saturated tuff. The hydraulic test used a new rock block testing machine, which...
Microwave Measurements of the Water Content of Bentonite
The theory of operation of microwave coaxial resonators is described. Sample preparation and the application of resonator techniques to the measurement of the permittivity (dielectric...
Laboratory Determined Suction Potential of Topopah Spring Tuff at High Temperatures
The purpose of this work is to experimentally determine the capillary suction potential of Topopah Spring tuff from Yucca Mountain, Nye County, Nevada. This data can be used to help characterize...
Durability, Mechanical, and Thermal Properties of Experimental Glass-Ceramic Forms for Immobilizing ICPP High Level Waste
The high-level liquid waste generated at the Idaho Chemical Processing Plant (ICPP) is routinely solidified into granular calcined high-level waste (HLW) and stored onsite. A research...
Geophysical Borehole Logging in the Unsaturated Zone, Yucca Mountain, Nevada
Borehole geophysical logging for site characterization in the volcanic rocks at the proposed nuclear waste repository at Yucca Mountain, Nevada, requires data collection under rather unusual...
Effect of a Low-Permeability Layer on Calculated Gas Flow at Yucca Mountain
Yucca Mountain is being studied to determine its suitability as a location for a high-level nuclear waste repository. The mountain is a steep-sided linear ridge which is underlain by a...
Regulatory Requirements and Long-Term Repository Host Rock Performance
The regulatory requirements governing the disposal of high-level radioactive wastes in mined geologic repositories acknowledge the long-lived nature of the wastes and require the consideration...
Degradation Mode Surveys of High Performance Candidate Container Materials
Corrosion resistant materials are being considered for the metallic barrier of the Yucca Mountain Project's high-level radioactive waste disposal containers. Nickel-chromium-molybdenum...
The Adoption of Mechanized Excavation Techniques for the Superconducting Super Collider
The Superconducting Super Collider (SSC) is the latest and largest in a line of high-energy physics accelerator projects. The five increasingly energetic accelerators which make up the...
Testing of Materials and Scale Models for Impact Limiters
Aluminum Honeycomb and Polyurethane foam specimens were tested to obtain experimental data on the material's behavior under different loading conditions. This paper reports...
Return to search