Hydraulics and Sediment Transport Processes in a Pool-Riffle Rocky Mountain Stream
Sediment transport processes related to varying channel-bed morphology were investigated from April to November, 1993 along a 1 km pool-riffle and step-pool reach of North Saint Vrain...
On Habitat Simulation in Mountain Rivers
Mountain rivers are quite different from other rivers and one of the characteristics that distinguish them from others is the large variation in velocities with time, with location in...
Coarse Sediment Transport and the Maintenance of Fish Habitat in the Upper Colorado River
An analysis of the relation between discharge and boundary shear stress is presented for an alluvial reach of the Colorado River near Grand Junction, CO. The analysis indicates that the...
Palaeohydraulic reconstruction of floods in upland UK bedrock streams: progress, problems and prospects
Palaeoflood evidence from five small upland Pennine catchments in the UK is used with the HEC-2 flow routine to simulate Holocene peak discharges. Even allowing for uncertainty, sensitivity...
Relation Between Largest Known Flood Discharge and Elevation in Montana
Previous studies relating unit discharge to elevation indicated that large floods in the Rocky Mountains may be limited by elevation. However, high-elevation data are sparse in Montana...
Historic-Flood Evaluation and Research Needs in Mountainous Areas
An evaluation of historic flood estimates in mountainous areas in Colorado was made to assess their accuracy. The purpose of this evaluation is to enhance awareness of the need to assess...
3D model verification for a groyne and harbor experiment
A discussion of 3D model verification and calibration based on measurements in a flume is carried out for different test cases (groyne, harbor). The measurement data is available for public...
Estimation of Design Surge Heights by Utilizing Meteorologic and Oceanographic Data
Data on cyclonic storm surge height have been generated with the help of a statistical simulation model. Data on observed maximum cyclonic wind speed and the length of the continental...
Velocity Control Rings for RC Pipe on Steep Slopes
This paper discusses the use of internal concrete rings to reduce velocity and concrete erosion for reinforced concrete pipes on steep slopes in the Southern California area....
A Physically-Based Model of Channel Widening
The application of many existing models of river channel morphology is limited by their inability to account for bank erosion and changing channel width through time. This paper outlines...
Air Entrainment and Bubble Behavior in Plunge Pools
This study analyzes air entrainment by falling nappes and bubble behavior in plunge pools, using an experimental-analytical-numerical method. The experimental work was done at the Tennessee...
Macro-Roughness Effects on Stream Reaeration
The gas transfer coefficient is key to modeling dissolved oxygen levels in streams. Engineers commonly predict it as a function of mean flow depth, velocity, and slope. Large errors are...
Air Concentration Measurements in Highly-Turbulent Flow on a Steeply-Sloping Chute
The U.S. Bureau of Reclamation's (Reclamation) stepped spillway overtopping protection research program required air concentration profile data be obtained during testing in a large, 15.2-m-high...
Luo, Ming
The algebraic stress model of turbulence is employed to calculate the 2-D flow field of the Gongzhui reservoir region. The discharge distribution among the discharging structures is achieved...
Reservoir Sediment Removal: Hydrosuction Dredging
Hydrosuction dredging is a relatively little-known method of removing sediment deposits from reservoirs. The method is similar to traditional hydraulic dredging except the difference between...
Plunge-Pool Scour by Inclined Jets
A series of experiments were performed in a sand-bed plunge pool with circular jets produced by nozzles at different angles and elevations and conveying different flow discharges. The...
Scour Hole Depth Downstream of the SAF stilling Basin
A Model to predict the maximum local scour depth downstream of the SAF stilling basin is presented. The model is based on stability analysis of a particle attacked by the hydrodynamic...
Bed Material and Numerical Modeling in a Gravel/Cobble Bed Stream
The characteristics of bed material in a cobble or gravel river and their use for numerical simulation of flushing flow needs are discussed. There are three types of bed material: 1) material...
Discharge-Frequency Relationships in Distributary Flow Systems
The paper describes discharge-frequency relationships in distributary flow systems. The stream network that makes up the flow system is described in terms of how the various stream segments...
Management of Sediments on the Red River Waterway Project
The Red River is a large alluvial river system with the lower 280 miles currently being developed for shallow draft navigation. The navigation project entails construction of five locks...
Return to search