Canal Models and You
Unsteady canal simulation models require serious investments of time and personnel. The reasons for deciding to invest in a model, as well as reasons to not invest, are discussed. Canal...
Numerical Methods Used to Model Unsteady Canal Flow
Investigating the response characteristics of irrigation waer supply and distribution systems is essential if a good design is to be developed. Numerical simulation techniques have been...
Source of Atrazine and Desethylatrazine in a River, During Base Flow
A budget of atrazine and desethylatrazine loads was computed for a 116-kilometer reach of the Cedar River in Iowa to determine where these compounds enter the river during base-flow conditions....
Hydrologic and Geochemical Approaches for Determining Ground-Water Flow Components
Lyman Lake is an irrigation-storage reservoir on the Little Colorado River near St. Johns, Arizona. The main sources of water for the lake are streamflow in the Little Colorado River and...
Interaction of Irrigation Water and Drainage Flow
This study was conducted to evaluate the effect of irrigation management on subsurface drainage flow in an arid irrigated area. The irrigation management and drainage flow were monitored...
Crop Simulation Modeling for On-Farm Irrigation Management
Crop models that estimate crop productivity in response to soil water offer potential for on-farm irrigation management. Useful models must produce accurate estimates of the soil water...
Crop Growth Models in Irrigation Management: Applications and Limitations
Crop growth models can provide helpful input to the complex process of on-farm irrigation decision making. The use of crop models in irrigation management will likely expand due to improved...
Evapotranspiration and Growth Predictions of CERES Maize, Sorghum and Wheat in the Southern High Plains
Daily ET, leaf area index, and dry matter accumulation were predicted using CERES models for maize, sorghum, and winter wheat grown at Bushland, Texas to determine the models'...
Unique Problems in Modeling Irrigation Canals
Irrigation-canal modeling is based on the same unsteady flow equations used for river modeling. However the canal and irrigation environment present several unique simulation problems...
Informed Use and Potential Pitfalls of Canal Models
Numerical models of unsteady flow in canals are used in the design, analysis and operation of irrigation canal systems. Their informed use requires knowledge of the potential pitfalls,...
Canal Model Evaluation and Comparison Criteria
The ASCE Task Committee on 'Irrigation Canal System Hydraulic Modeling' was formed to evaluate existing canal unsteady flow models (computer programs) and to...
A Coupled Surface-Water and Ground-Water Model
In areas with dynamic and hydraulically well connected ground-water and surface-water systems, it is desirable that stream-aquifer interaction be simulated with models of equal sophistication...
A New Method for Calculating a Mathematical Expression for Streamflow Recession
An empirical method has been devised to calculate the master recession curve, which is a mathematical expression for streamflow recession during times of negligible direct runoff. The...
Time Scales for Surface-Subsurface Flow Modeling
Traditionally, interactive free surface flow and subsurface flow are analyzed separately, using infiltration rate described by an infiltration formula as the common boundary condition....
Description and Evaluation of Program CANAL
CANAL was developed in 1987 at Utah State University to perform hydrodynamic computer simulations of canal networks. This paper describes the model and offers opinions on the model's...
Description and Evaluation of Program: SNUSM
The Staggered Net Unsteady State Model (SNUSM) was developed in the early 1980's by the United States Bureau of Reclamation under the direction of Bob Gooch and Al Graves....
Description and Evaluation of Program MODIS
MODIS is an implicit hydrodynamic modeling package that has been developed to investigate the hydraulic performance of dynamic controlled irrigation systems. The model's most...
Description and Evaluation of Program: DUFLOW
DUFLOW is a micro-computer software package for simulating one-dimensional unsteady flow in open channel systems. It is designed for simple networks of channels with simple structures....
Description and Evaluation of Program: USM
USM was developed by the USBR for simulating unsteady flow conditions in canals with either manual or automatic gate operation. This paper describes the model and discusses the relative...
Description and Evaluation of Program: CARIMA
The CARIMA code simulates unsteady free-surface flow in simple or multiply connected systems of rivers or canals. The simulation uses the Preissmann implicit finite-difference method for...
Return to search