Simple Water Measuring Device for On Farm Irrigation Evaluation
Laboratory experiments were conducted for the calibration of three flumes of different sizes. The logarithmic transformation in linear regression yielded excellent results for the stage-discharge...
Delivering Appropriate Quantities of Water to the Farm
To study how well an irrigation district was able to meet farmer demand, water deliveries along two monitored lateral canals were compared to the orders and bills for these events. The...
Computation of Unsaturated Soil Parameters Using Upward Infiltration Empirical Data
The relationship between soil moisture content and hydraulic conductivity with the soil tension be defined to simulate unsaturated flow in a porous media. Direct measurements of these...
Strategies to Reduce Salt Load in Drainage Water
A study of irrigation efficiency, drainage flow and trace element loading in the drainage water from a 14000 ha irrigation district on the west side of the San Joaquin Valley of California...
Geochemical Factors Affecting Trace Element Mobility
Selected geochemical processes to be considered when modeling the movement of trace elements in soils are presented. The topics covered include: solid phase-solubility equilibria, ion...
Deep Percolation, Drainage and Water Quality
The purpose of this study is to illustrate and and qualitatively describe results of steady and transient numerical simulations examining the influence of drain spacing and depth on shallow...
Hydrogeologic Factors Affecting Trace Element Mobility
Alluvial deposits often comprise the aquifer beneath irrigated lands in the southwestern U.S. The presence of buried stream channels in, and layering of, shallow alluvial deposits are...
Rehabilitation of Water Wells
The main causes of declining well yield are biological growths, mechanical clogging and chemical encrustation. Because the treatment of the causes of encrustation and clogging is expensive...
Annual Flow Variations in the Nile River System
The annual flow series of the Nile River System at some key gauging stations for the period 1912-1988 are presented and discussed. The relatively stable period, pre-1961, has helped establish...
Entrenched Channels and Alluvial Fan Flooding
Because the individual flood paths on alluvial fans are unpredictable, determining flood hazards on such landforms is hindered by particular complications. The proper framework in which...
Potential Sediment Yield From a Burned Drainage - An Example From the Wasatch Front, Utah
Two debris flows hit Mapleton City, Utah, as a result of rainstorms on a steep drainage basin, which had recently been burned. Debris flow potential for the area was evaluated to determine...
Process-Based Debris-Flow Prediction Method
This paper briefly identifies problems with traditional approaches to debris-flow prediction and presents a simplified process-based model (Williams and others, 1988) to accomplish the...
Olancha Debris Flow: An Example of an Isolated Damaging Event
This paper presents the case history of an isolated flood/debris flow that damaged the City of Los Angeles Department of Water and Power Aqueduct and threatened serious damage to U.S....
Deadly Debris Flows on I-5 Near Grapevine, CA
A series of debris flows inundated the southbound lanes of interstate Highway 5 (1-5) approximately 110 km (70 mi) NW of Los Angeles, California, between Fort Tejon and Grapevine, early...
Rheological Properties of Simulated Debris Flows in the Laboratory Environment
Steady debris flows with or without a snout are simulated in a 'conveyor-belt' flume using dry glass spheres of a uniform size, 5 or 14 mm in diameter, and their...
Rheological Analysis of Fine-Grained Natural Debris-Flow Material
Experiments were conducted on large samples of fine-grained material (?2mm) from a natural debris flow using a wide-gap concentric-cylinder viscometer. The rheological behavior of this...
The Bearing Capacity of Debris Flows
Debris flows are made of a cohesive muddy matrix in which large and heavy particles exist in suspension. To explain how these particles are maintained in suspension, several mechanisms...
Flume Experiments on Debris Flow
With the different characteristics of grain motion in debris flow, three layers are vertically divided, i.e., viscous collision layer, inertial collision layer and suspension layer. Both...
Experimental Study on the Rheologic Behavior of the Slurry of Viscous Debris Flow
The slurry of viscous debris flow is a kind of dense solid-liquid mixture. It has very complicated rheologic behavior. As shown in the experiment described in this paper, the slurry exhibits...
Experimental Study on the Flow Properties of Debris Flow
A new flow property model for viscous debris flow was presented in this paper. The results of the flow property model were in good agreement with the results of specific experiments. The...
Return to search