Investigation of Concrete at a Middle East Plant
In recent years, reinforced concrete construction in the Middle East has been beset by durability problems. The causes include availability of a limited number of skilled workers, marginal...

Composites Performance in the Infrastructure
Fiberglass reinforced plastics (FRP) composites have been used in demanding structural applications, mostly for special corrosion resistant construction products, for several decades....

Unidirected Twined-Strand Composites and Their Uses
Twined strand composites are a new class of unidirected continuous-fiber-reinforced composite materials where the orientation of the continuous fibers is a twine of unidirected helically...

Adhesives and Structural Plastics
An overview of some primary considerations for the use of adhesives and their advantages in connection of structural plastics is presented. Effective joint geometries, surface preparations,...

Full Scale Tests on Concentrically Loaded Fiber-Reinforced Pultruded Columns
This paper briefly reports on the experimental investigation in connection with the short term behavior of pultruded structural members under concentric loading. In particular, results...

Polyolefin Plastic Water Service Line Performance
Polyolefin (PO) plastic piping made from polyethylene (PE) and polybutylene (PB) materials have been used in diameters of about 1 in. for water service lines for buildings. Both PE and...

Bond Strength of Straight GFRP Rebars
An overview of a study on bond of straight Glass-fiber-reinforced-plastic (GFRP) rebars to concrete is presented. The 54 specimens to be tested include several variables, such as the mode...

Feasibility of FRP Molded Grating-Concrete Composites for One-Way Slab Systems
This paper describes the behavior of one-way concrete slabs reinforced with Fiberglass Reinforced Plastic (FRP) molded grating. FRP molded grating is commercially available and is mainly...

Hybrid (FRP+Steel) Reinforcement for Concrete Structures
The most popular method to prevent corrosion of steel rebars and prestressing tendons is epoxy coating. This paper presents an alternative approach consisting in the combination of a fiber-reinforced-plastic...

Investigation of the Behavior of Reinforced Plastic Columns with Concrete Core
This paper describes an experimental investigation into the behavior of reinforced plastic columns with tubular (hollow) sections. The columns were pultruded and had a cross-section which...

Behavior of Externally Confined Concrete Columns
This paper investigates the feasibility of strengthening of seismically deficient concrete columns with high-strength fiber composite straps. The concrete columns will be externally confined...

Fiber/Epoxy Composites Strengthen Bridge Columns
The California Department of Transportation is using high strength fiber/epoxy composites to strengthen existing reinforced concrete bridge columns. These advanced composite materials...

Behavior of Concrete-Graphite/Epoxy Sections in Composite Bridge Girders
The focus of this work is on the behavior of composite bridge girders constructed from carbon-fiber-reinforced-plastic sections and concrete slabs. The study examines four-point bending...

Nonprestressed and Prestressed FRP Sheets as External Reinforcement of Wood Members
The paper presents a summary of an analytical and experimental investigation of a new form of wood construction involving external bonding of thin fiber reinforced plastic (FRP) sheets...

Structural Performance of Hardwood-Metal Composite Beams
This research examines the deflection characteristics of layered timber/steel composite beams with hopes of applying such principles to large timber structures such as highway bridges....

Evaluation of Partial Depth Spall Repair Materials and Procedures
In 1990, as a part of a Strategic Highway Research Program project (SHRP H-106, Innovative Materials Development and Testing), an investigation was initiated to evaluate the performance...

The Crown and the Curtain Wall
Crowning the complex curtainwall of an 870 ft concrete tower with a 150 ft high crown of aluminum masts in concentric rings above the 60th floor required ingenuity and extraordinary cooperation...

Migration of Spilled Oil from Ruptured Underground Crude Oil Pipelines in the Memphis Area
This study evaluated the impact of an oil pipeline rupture in the recharge area of a West Tennessee aquifer. Two potential break locations were chosen in the alluvial valley of a main...

An Assessment of Environmental Costs Associated with Crude Oil Pipeline Damage Caused by Earthquakes
This paper presents a methodology for assessing the risk of environmental contamination from oil pipeline leaks caused by earthquakes. Risk is measured both as volume of oil released and...

Hydraulic Engineering
Saving a Threatened Resource?In Search of Solutions
This proceedings, Hydraulic Engineering: Saving a Threatened Resource?In Search of Solutions, cotains papers presented at the 1992 National...

 

 

 

 

Return to search