Wave Transformation and Load Reduction Using a Small Tandem Reef Breakwater ? Physical Model Tests
The performance of several small reef breakwaters, and a tandem breakwater system (consisting of a reef breakwater positioned upwave from a surface-piercing main breakwater), are quantified...

The Evolution of Breakwater Design
The purpose of this paper is to present a view of the evolution of both the rubble mound and vertical faced breakwaters from the earliest design through the Iribarren and Hudson era. Determining...

Dynamic Loading of Airfield Pavements Caused by Aircraft Operations on Rough Runways
This paper presents results for dynamic pavement loading of various aircraft under takeoff and taxing scenarios. The data were obtained from computer simulation and applied to the Corps...

Implementation of Elastic Layered Theory for Design of Unbonded Overlays
The U.S. Army and Air Force have implemented the elastic layered theory for design of unbonded overlays for rigid airfield pavements. The procedure allows for design of unbonded overlays...

The Use of Crumb Rubber Modifier in Hot-Mix Asphalt
This paper summarizes the literature on the use of CRM as an additive in HMA. Wet and dry processes are discussed and the objective of each explained. Material, design and construction...

Modified Asphalt Binders - How Do They Compare?
This report summarizes some of the research that the US Army Engineer Waterways Experiment Station (WES) has conducted on asphalt modification of airport/airfield pavements. these laboratory...

Effects of Lateral Heading Flow Steadiness on Lateral Spillage
Hourly inflow and spillage rates from three lateral canals in the Imperial Irrigation District in Southern California were measured for seven months and subsequently analyzed to identify...

Joint Probability Distribution of Rainfall Intensity and Duration
Intensity-duration-frequency (IDF) curves are widely used for peak discharge estimation in designing hydraulic structures. Accurate interpolated and extrapolated intensity values are difficult...

Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Structural Reliability
The focus of this paper is to provide an overview of analysis and optimal design of systems in which the system reliability is dependent upon the structure of the system (such as the layout...

Vadose-Zone Monitoring, Sanitary Treatment Plant Sludge-Drying Beds, Rocky Flats Plant, Golden, Colorado
The NPDES Federal Facilities Compliance Agreement (NPDES FFCA) of March 25, 1991 between the U. S. Department of Energy (DOE) and the U. S. Environmental Protection Agency (EPA), pursuant...

Partnering in Environmental Restoration: The Coastal America Model
The Coastal America Partnership was initiated in 1993 with the underlying principal that collaborative efforts would be more successful than attempting individual agency solutions. To...

Reliability Analysis of a Multi-Reservoir Water Distribution System
A methodology for evaluating system reliability is developed to assist in the planning and management of a multi-reservoir water distribution system. The minimum cut-set approach is employed...

Concrete Watertight Structures and Hazardous Liquid Containment
The purpose of Concrete Watertight Structures and Hazardous Liquid Containment is to provide a practical guide for practicing engineers who...

Engineering, Construction, and Operations in Space IV
This proceedings, Engineering, Construction and Operations in Space IV, consists of over 155 papers presented at Space 94, the Fourth International...

Success Syndrome: The Collapse of the Dee Bridge
Scaling up existing successful designs can cause latent weaknesses to become dominant, leading to catastrophe. By studying past failures where this has happened--for example, the 1847...

Road to Recovery
The effect of the Loma Prieta earthquake on San Francisco's elevated viaduct system is still being felt more than four years later. Immediately after the quake, the entire...

Coastal Groins and Nearshore Breakwaters
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers No. 6. This book provides guidance for the design and placement...

Roller Compacted Concrete IV
This engineering manual Roller-Compacted Concrete from the U.S. Army Corps of Engineers provides information and guidance on the use of roller-compacted...

Retaining and Flood Walls
The engineering manual Retaining and Flood Walls from the U.S. Army Corps of Engineers provides guidance for the safe design and economical...

Modular Evolution
The construction industry typically thinks of modular steel bridges in terms of the World War II vintage Bailey Bridge. The Bailey Bridge was designed to be quickly deployed to replace...

 

 

 

 

Return to search