Safe-Load-Limit of Plates in Cylindrical Bending
The derivation of a closed-form expression for the viscoelastic critical load of long thin plates undergoing cylindrical bending and made of a linear time-dependent 'solid'-type...
Design Considerations for Large-Scale Filament-Wound Composite Structures
An experimental investigation was conducted to quantify scaling effects in filament-wound composite structures. These preliminary results support the notion that an increase in thickness...
Frictionless Contact of Composite Laminates
An approximate solution technique for determination of contact stress distribution under a curved, rigid punch indenting an arbitrary laminated composite plate is outlined. The individual...
A Damping Model for the Vibration of Nonlinear Laminated Composite Cylindrical Panels with High Order Transverse Shears
The damping characteristics of nonlinear vibration of a cylindrical panel including large displacements/rotations and parabolic transverse shears has been discussed in this study. The...
Partial Hybrid Stress Element for Higher-Order Laminated Plates Theory
The partial hybrid stress method is applied to higher-order plate theory for orthotropic laminated plates. This new element performs better than displacement formulation and approaches...
Visualization of the Microstructural Response of Lightly-Cemented Granular Soils Under Uniaxial Strain Conditions
The microstructural response of granular soil under uniaxial strain is being investigated through direct observation of micromotions. Two techniques are being refined to quantify individual...
Development of a Constitutive Model for Impact Limiters
A constitutive model is being developed for 'impact limiter' materials such as aluminum honeycombs and polyurethane foams. Among other applications, these materials...
Fracture Response of Cement Matrices Reinforced with High Volume Fiber Fraction
Toughening mechanisms of cement matrices reinforced with high volume fiber fraction have been experimentally studied by quantitative image analysis and laser holographic interferometry....
Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...
Mechanical Behavior of Composites with Interphases
The effect of interphases on the mechanical behavior of fiber-reinforced composites is studied. Two problems, a cracked fiber in a matrix, and a fiber pulled out of a matrix, are discussed....
On Statistical Micromechanical Process Damage Models for Brittle Solids with Interacting Microcracks
Two-dimensional micromechanical damage models with strongly interacting microcracks are presented to investigate the overall nonlinear mechanical responses of microcrack-weakened brittle...
Nonlocality of Continuum Approximation of Microcracked Materials
A continuum with nonlocal damage has recently been shown to be an effective approach for the analysis of strain-softening structures. The basic idea is that only the damage, normally caused...
Strain Rate Effects on Pressuremeter Testing
This paper discusses the effect of strain rate on the cavity expansion problem and pressuremeter test. A cuboidal shear device, CSD, was used to perform pressuremeter strain path tests...
Influence of Finite Deformations in the Stress-Strain Modelling of Granular Media
An incremental formulations of the stress-strain law is presented for quasi-static deformation of granular solids. The stress-strain relationship is derived for an element of granular...
Instability and Plastic Flow of Soils
Materials should according to Drucker's postulate become unstable when the second increment of plastic work is negative. Experimental observations however show otherwise....
Constitutive Relations for Large Deformation Plasticity
Influence of the choice of measures of stress and deformation upon the representation of constitutive relations for elasto-plastic solids undergoing finite deformation is discussed. The...
Modeling of Successive Impacts in Sand
The principal aspects of numerical modeling of successive, high energy impacts in sand are discussed in this paper. These include the numerical formulation used for solution of the equations...
A Micromechanics Model for Rough Interfaces
A new constitutive model for transfer of interfacial tractions along rough cracks in strain softening composites is presented. The model relates the normal and shearing stresses on the...
Penetration Tests in a Particulate Calibration Chamber
A numerical technique which couples discrete element method with boundary element method has been developed to simulate a two dimensional particulate assembly. Soil particles in the near...
Comparison of a Microscopic Model and a Macroscopic Model Predictions on the Stress-Strain Behavior of a Soil
The stress-strain behavior of a soil under drained triaxial conditions was simulated using the Microscopic constitutive model TRUBAL. The model parameters for the Macroscopic constitutive...
Return to search