Multiphase Flows and the Modeling of Drifting Snow
Three categories of multiphase flow theories are commonly specialized for modeling drifting snow; the 'two-fluid' model, particle tracking schemes and kinetic...
Spray and Ice Measurement Instrumentation for Ships
Bow slamming is the primary water delivery mechanism for ship superstructure icing. Spray flux is largely dependent upon hull dynamics, and cannot be computed numerically with current...
The USACRREL Underwater Frazil Ice Detector
A modified underwater frazil ice detector has been developed at USACRREL. This detector, which operates remotely, can automatically start deicing procedures and alert operators to the...
New Support for Pin-Hanger Bridges
To promote safety of their bridges, many state highway departments are considering ways to add auxiliary support to existing pin-hanger bridges. The Pennsylvania DOT and its open-end consultant...
Condition Assessment Experience with Silos and Bunkers
This paper presents a methodology for condition assessment of coal silos and bunkers for retrofitting projects. Some typical problems such as corrosion, erosion, vibrations and buckling...
Introduction to Structural and Mechanical Failure Modes for Nuclear Power Facilities
The three papers presented in this section discuss the types of information (i.e., dynamic tests, earthquake experience and analytical data) which are used in predicting the capacity of...
Radiocolloid Transport in Saturated and Unsaturated Fractures
Studies have shown that radionuclides and toxic materials can attach to colloidal particles in groundwater or are themselves colloids. Since these contaminated particles can migrate several...
Strain Distribution in Fault Zones and Fluid Flow
Field and laboratory studies have shown that mechanical shearing in fault zones produces a repeatable fabric that changes with increasing shear strain. In the brittle field of mechanical...
Fractal Characteristics of Fracture Roughness and Aperture Data
In this study mathematical expressions are developed for the characteristics of apertures between rough surfaces. It shown that the correlation between the opposite surfaces influences...
Assessment of Fracture-Sampling Techniques for Laboratory Tests on Core
As part of the site characterization work to be done at Yucca Mountain in Nye County, Nevada, a candidate site for the first mined-geologic repository for high-level nuclear waste, laboratory...
Conceptual Design Study of Geological Disposal System of High-Level Waste
Conceptual design study of geological disposal system for HLW was carried out taking into account geological environment in Japan, in order to provide disposal concepts for integrated...
Effect of Material Heterogeneities on Flow Through Porous Media
Modeling studies were conducted to determine the effects of material heterogeneities on the flow of water through rock. Multiple numerical calculations were made using random variations...
Lubrication Theory Analysis of the Permeability of Rough-Walled Fractures
Lubrication theory is used to study the permeability of rough-walled rock fractures. Two idealized models of a fracture, in which the roughness follows a sinusoidal or a sawtooth variation,...
Unsaturated Flow Through a Variable Aperture Fracture in Topopah Spring Welded Tuff
The role of fractures in unsaturated flow through welded and nonwelded tuffaceous rocks is a fundamental question being addressed in performance assessment activities for the Yucca Mountain...
Modelling of Hydro-Thermo-Mechanical Effects in a Fracture Intersecting a Nuclear Waste Deposition Hole
The groundwater flow in a vertical fracture intersecting a hypothetical nuclear waste deposition hole was examined. After excavation and emplacement of the nuclear waste canister, the...
Field Investigations for Seismic Effects on Mechanical and Geohydrologic Response of Underground Structures in Jointed Rock
An exploratory Seismic Rock Mechanics research program has been initiated by the U.S. Nuclear Regulatory Commission at the Center for Nuclear Waste Regulatory Analyses (CNWRA) to study...
Boundary Integral Methods for Unsaturated Flow
A boundary integral equation method (BIEM) is described for numerical analysis of quasilinear steady unsaturated flow in homogeneous material. The applicability of the exponential model...
Analysis of Solute Transport in an Intermediate-Scale Unsaturated Flow Experiment
A simplified stochastic model was derived and applied to two unsaturated flow experiments conducted in an intermediate-scale caisson. Parameters for the flow and transport models were...
Theory of Matrix and Fracture Flow Regimes in Unsaturated, Fractured Porous Media
The flow behavior of a two-dimensional, unsaturated fracture-matrix system is characterized by a critical flux qf*...
Effect of a Low-Permeability Layer on Calculated Gas Flow at Yucca Mountain
Yucca Mountain is being studied to determine its suitability as a location for a high-level nuclear waste repository. The mountain is a steep-sided linear ridge which is underlain by a...
Return to search