Probability Model of Load Exceedances under Cyclic Loadings
A probability model for nonlinear load exceedances subjected to a Poisson process with reversible cyclic load pulses was developed and is presented in this paper. A reversible cyclic load...
Inspection Planning for Surface Fatigue Cracks
A reliability based method for planning of inspections to detect surface fatigue cracks is presented. Cracks are described as semi-elliptical surface cracks. The conditions governing fatigue...
Some Remarks on BK-Models for Fatigue Crack Growth
The choice of a model parameter for concentrating the entire uncertainties of a constant load amplitude fatigue crack growth process is shown to be sufficient when reproducing the first...
A Fatigue Reliability Model for Railway Bridges
A fatigue reliability model is described for safety evaluation of steel railway bridges. The model is a function of six independent random variables and can accommodate different types...
A Stochastic Approach to the Fatigue Reliability
In this paper, the stochastic approach, which combines the mixed boundary integral equation method (Lua et al (1992a)) with the First Order Reliability Method (FORM), is applied to study...
Some Modeling and Analysis Techniques for Wave Propagation in Random Media
Some mathematical modeling techniques for the problem of wave propagation in randomly imperfect periodic medium are reviewed: multiscale formulation and random evolution modeling. These...
Wavefront Propagation in Random Granular Media
A very brief account is given of a stochastic method developed for analysis of transient waves propagating in one-dimensional random granular-type media. The method is suited to study...
Fatigue Strength of Welded Joints Under Broadband Loadings
Twelve welded high strength steel cruciform specimens were tested under stochastic loadings to determine the influence on fatigue life of the bandwidth of the loading process. Constant...
Low-Cycle Fatigue Prediction for Ramberg-Osgood Type Materials
The prediction of low-cycle fatigue crack growth is successfully made by an equation employing the J-integral range. This equation, originally proposed by Dowling and Begley, is analogous...
Fatigue/Fracture Reliability and Maintainability of Structural Systems: A Method of Analysis
Fatigue and fracture of structural components are the principal modes of failure for those structural systems that are dominated by tensile dynamic (oscillatory) loads. As the structure...
TLP Fatigue Due to Second-Order Springing
For offhsore oil production in water depths beyond 300-350 m, the tension leg platform (TLP) has become an increasingly popular design concept. The TLP is a floating structure with excess...
A Non-Gaussian Fatigue Model for Offshore Structures
Fatigue damage accumulation in members of offshore structures can be affected by various aspects of the non-Gaussian response stress time history induced by the nonlinear/non-Gaussian...
A New Probabilistic Model for the Fracture Toughness of Concrete
Scatter of strength and toughness parameters as well as scale effect are often observed in brittle materials such as concrete. The recently developed Crack Diffusion Model is utilized....
Fabric Related Probabilistic Model for Granular Materials
A new anisotropic noncoaxial incremental constitutive model for granular materials (Jahedi et al., 1990) was developed, in which a Fabric reconstruction factor '?+',...
Stochastic Modeling of Short Fiber Reinforced Composites?A Review
Since the early 1960's, an extensive research and development has been carried out with fiber reinforced cements and concretes. Modeling of such heterogeneous material is still in the...
Risk Based Optimal Fatigue Testing
Optimal fatigue life testing of materials is considered. Based on minimization of the total expected costs of a mechanical component a strategy is suggested to determine the optimal stress...
Optimal Configuration for Fiber Reinforced Composites under Uncertainties of Material Properties and Loadings
Fiber reinforced composite structures could be designed by selecting proper fiber orientation in structures to suit specified desires for strength, stiffness or other mechanical properties....
Critical Buckling Load Statistics of an Uncertain Column
The objective of this paper is to examine the statistics of the buckling load of a column with uncertain material properties. The elastic modulus is assumed to be a random process that...
Hydrogeotechnical Considerations for the Disposal of Oil Shale Solid Waste Material
Laboratory tests and five large scale lysimeters (7.3?3.0?3.0 m deep) have been constructed to collect information and data on hydrogeotechnical factors which affect an oil shale solid...
Metrication of Construction?A Message to the American Society of Civil Engineers
The author discusses the reasons for metrication of the U.S. construction industry, describes the Canadian experience in this area, and outlines the necessary steps to alleviate the metrication...
Return to search