Modeling and Field Experiments for Tracer Gas Tests
Numerical modeling and field experiments were used to extend the tracer gas technique for determining surface gas transfer rates to shallow bays. Two-dimensional modeling was used to investigate...
Field Verification of Diffuser Performance
Effluent diffusers are used to gain relief from end-of-pipe acute toxicity criteria in NPDES water quality-based discharge permitting. Regulatory agencies require that the dilution provided...
Finite Element Modeling of Flow in Wetlands
Requirements for developing a mathematical model of unsteady flow in wetlands are suggested. An equivalent continuum approximation is appropriate to avoid problems of describing the turbulence...
TABS-2 Application to Kawainui Marsh Flood Control
The TABS-2 mathematical modeling system was used to evaluate the effectiveness of alternatives designed to eliminate flooding problems in the Kawainui Marsh located in Kailua on the east...
Tidal Mass Exchange Between a Submersed Aquatic Vegetation Bed and the Main Channel of the Potomac River
Tidal mass exchange between a submersed aquatic vegetation (SAV) bed and the main channel of the Potomac River was investigated. Water levels were recorded at 5 minute intervals from August...
The Role of Computational Fluid Dynamics in Hydroturbine Analysis
Prospects of developing comprehensive methods of computational fluid dynamics for the analysis and design of new generation of hydroturbines are considered. Unique requirements for this...
Numerical Modeling of Air/Water Mixtures for Internal Flows
The Tennessee Valley Authority (TVA) currently is working with several organizations to develop design tools for the aerating hydroturbine. Part of this effort includes the investigation...
One Dimensional Finite Element Model for Spillway Flow
This paper summarizes the development and preliminary testing of a one dimensional numerical model termed 'CURVE1D.' The model is nonhydrostatic, including bed...
Rio Moquino Stream Stability and Erosion Protection, Jackpile Uranium Mine
The uniqueness of the Jackpile Reclamation Project and the changes in reclamation technology over the past few years have prompted a reexamination of some of the design criteria specified...
Flood Control Design for Development on Alluvial Fans
Hydrology, debris production, sediment transport and hydraulic studies were conducted to provide flood control for a development within an alluvial fan floodplain. Innovative techniques...
Gravitational Circulation in a Tidal Strait
Eight months of continuous measurements of tidal current profiles with an acoustic Doppler current profiler (ADCP) were made in Carquinez Strait, California, during 1988 for the purpose...
Kings Bay Channel Expansion Hybrid Model Assessment
A hybrid modeling system (coupled physical and numerical models) was developed to assess velocity and sediment impacts associated with channel expansion. Physical model tides and velocities...
Incipient Motion Criteria Defining Safe Zones for Salmon Spawning Habitat
Approximately 70% of the City of Seattle's water supply is drawn from the Cedar River. Between 200,000 and 400,000 sockeye salmon spawn annually in this partially dewatered...
Effects of Fine Sediment Intrusion on Spawning Gravel in Southeast Alaska
The supply of sediment to forest streams in Southeastern Alaska is related to the inherent instabilities of landforms, stream channels and the effects of logging practices. Debris avalanches,...
A Modular Visual Interface for Computational Fluids Forecasting
A forecasting system is under development for predicting the three-dimensional physical features (e.g. velocity, temperature etc.) of large water bodies. Visualization and interface development...
Visualization of Grids and Flow Fields for CFD Data
This paper will address visualization of grids and flow fields for computational field simulation. Specifically, we will present results and demonstrations of surface and grid generation...
Existing U.S. Standards in Hydraulic Engineering
The Task Committee on Recommendations for Standards in Hydraulics confined itself to topics that are used in hydraulic computations or design. Thus numerous standards related to size,...
Foreign Hydraulic Standards and Guidelines
Standardization in Europe is propelled by the incentive to achieve harmonization of design, testing, inspection and certification methods for an internal market among eighteen European...
Design of a Stratified Cooling Channel
Cooling ponds are used for managing waste heat discharges. Cooling ponds are, however, expensive to construct and operate. A cooling channel is studied as an alternative means of managing...
A Microcomputer-Based System for Two-Dimensional Flow Modeling
An integrated, microcomputer-based system has been developed for simulation of two-dimensional, unsteady, free surface flows. The system consists of a finite-element mesh generation code,...
Return to search