Response of the San Juan Bautista 156/101 Bridge to the 1979 Coyote Lake Earthquake
Strong-motion accelerograms are used to examine the response of a multiple-span highway bridge to earthquake loading. Estimates of modal frequencies and damping values for the first two...
Seismic Behavior of Long-Span Cable-Stayed Bridges
Special features of the earthquake-response analysis of cable-stayed bridges, subjected to multiple-support excitation, are presented including a basis for calculation of seismic forces...
Seismic Response Analysis of Two Major Bridge Structures
The seismic response analyses of two major bridge structures have been conducted. In these two bridges, portions of the piles are either submerged in the water or free-standing within...
Changes in Bridge Deck Flutter Derivatives Caused by Turbulence
This paper discusses some of the results of a wind tunnel study that tested the aeroelastic stability of section models in smooth and gusting flow. Wind gusts several times longer than...
A Discrete Model for the Estimation of the Elastic Abutment Stiffness
The purpose of this paper is the presentation of a simple method for the estimation of the abutment stiffness. In this method, the abutment is represented as a uniform rigid plate with...
Seismic Isolation of Bridge Structures
Seismic isolation concept has been extensively developed and applied in New Zealand and is receiving increased attention in the United States. Two bridge projects have incorporated the...
Monitoring a Bridge's Pulse
The Sunshine Skyway Bridge, which collapsed in 1980, is being replaced by the Florida Department of Transportation. The new Sunshine Skyway Bridge, which spans Tampa Bay between Bradenton...
Salvaging the Zilwaukee
In 1982, construction of the Zilwaukee Bridge in Michigan was disrupted when the launching truss failed to hold a precast concrete segment near Pier 11N, severely deflecting the cantilever...
Bridge Management: Computer Aided Priorities
Pennsylvania's Department of Transportation has invested $3.6 million in developing the concept and software for a Bridge Management System that will help determine the needs...
In-Situ Testing to Characterize Electric Transmission Line Routes
A review of the literature has shown few definitive studies which separate test variability from soil inhomogeneity. A sensitivity study was performed to evaluate the effects of the overall...
Cable Stays Catch On
The three completed cable stayed bridges in the U.S.�Pasco-Kennewick in Washington, Luling-Destrehan in Louisiana and East Huntington in West Virginia�will soon be joined by another half...
Beauty and the Bridge
At the California Department of Transportation, a special aesthetics unit works closely with the design engineers in the Division of Structures, which has won almost 400 prizes for its...
Rehabbing under Traffic
Redecking the Golden Gate Bridge with a light weight orthotropic steel plate deck left the 49 year old monument 11,000 tons lighter, 2 feet wider, and ready to carry traffic for the next...
Use of Nondestructive Testing in Rehabilitation of Wood Cooling Towers
State-of-the-art nondestructive evaluation (NDE) techniques, destructive testing, structural analysis, degradation rate models and statistical analysis are combined to optimize a major...
Nondestructive Evaluation of Timber Bridge Piles
A nondestructive technique for the determination of the in-place strength of timber bridge piling is presented herein. The testing technique is the ultrasonic wave propagation method in...
Building a Bridge Within a Bridge
The City of Grand Rapids had to replace an aging bridge connecting vital commercial centers on opposite sides of Michigan's Grand River. The city's consultants...
Timber in Bridges of West Coast
Experience has shown that timber can function very well as a bridge material. Proper inspection procedures combined with a structured maintenance program can improve the performance of...
Software for Optimum Design of Highway Bridge Beams
A software system for analysis and optimum design of welded plate beams subjected to AASHTO highway bridge loads and specifications is described. The system has the capability to design...
Interactive Bridge Optimization Program
This paper presents the development of a design methodology that includes the structural optimization process as an integrated component of girder bridge design. The optimization process...
Finite Element Analysis of Structural Details in Large Steel Bridge Superstructures
Various approaches for the finite element modeling of the connection details in large steel bridge superstructures are presented. It is noted that an accurate analysis of these details...
Return to search