ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...

Strain Rate Effects on Pressuremeter Testing
This paper discusses the effect of strain rate on the cavity expansion problem and pressuremeter test. A cuboidal shear device, CSD, was used to perform pressuremeter strain path tests...

Penetration Tests in a Particulate Calibration Chamber
A numerical technique which couples discrete element method with boundary element method has been developed to simulate a two dimensional particulate assembly. Soil particles in the near...

Comparison of a Microscopic Model and a Macroscopic Model Predictions on the Stress-Strain Behavior of a Soil
The stress-strain behavior of a soil under drained triaxial conditions was simulated using the Microscopic constitutive model TRUBAL. The model parameters for the Macroscopic constitutive...

A Time-Dependent Microplane Model for Creep of Cohesive Soils
The microplane model is used in this paper to describe the time-dependent (creep) behavior of cohesive soils (clays). The constitutive equations are defined on each of a set of microplanes...

Testing the Limits
More than 100,000 bridges in the U.S. are considered structurally deficient and in need of posted load limits or repair. As the number continues to mount, engineers search for a better...

Inspection Goes High Tech
Many believe that rehabilitation of the existing infrastructure�not net construction�will dominate the 1990s. Therefore, accurate condition assessment is crucial, since public works agencies...

Statistical Evaluation of CPT and DMT Measurements at the Heber Road Site
A series of field tests were conducted at several sites in the Imperial Valley, South California from 1983 to 1985. The field testing program included cone penetration, dilatometer, standard...

Scale Effects in Cone Penetration Tests
A field testing program was undertaken to examine the existence of scale effects between a miniature 1.27 cm² and 15 cm²...

Plate Load and Pressuremeter Testing in Saprolite
On the island of Oahu, Hawaii, an exploratory tunnel for the Interstate Route H-3 highway was completed in December 1989. The purpose of the exploratory tunnel was two-fold; first to locate...

In Situ Determination of Smith Soil Model Parameters for Wave Equation Analysis
A methodology for in situ determination of Smith soil model parameters for wave equation analysis is presented. The method uses a small-rod penetration test in conjunction with CAPWAPC...

Penetration Testing for Groundwater Contaminants
Recent advances in penetration testing technology have produced a variety of new penetration devices to measure groundwater conditions. This paper describes two specially designed devices;...

Determination of the Deformation Characteristics of a Jet-Grouted Shallow Tunnel in Alluvial Deposits by Means of In-Situ Measurements and Back Analysis
The deformation characteristics of a jet-grouted shallow tunnel in alluvial deposits are investigated. An intensive in-situ measuring program accompanied each of the various excavation...

Field Instrumentation Program Vital to Deep Excavation Project
An extensive field instrumentation, monitoring and evaluation program was implemented for a seven-level deep excavation project in Boston. Using the observational approach, the information...

Settlement of Shallow Foundations in Sands Selection of Stiffness on the Basis of Penetration Resistance
The paper discusses the use of the formulae of the theory of elasticity to compute the settlement of shallow foundations in sands when subjected to static loading. Special emphasis is...

Measurement of Subsurface, Deep Foundation and Slab/Subgrade Conditions with In Situ Seismic, Sonic and Vibration Methods
Case histories are presented to illustrate quality assurance and forensic applications of nondestructive testing and evaluation (NDT&E) methods for in situ investigation of subsurface...

Pressuremeter Stress Relaxation Testing in a Permafrost Tunnel
In the spring of 1988, a geotechnical testing program was carried out in the U.S. Army CRREL Permafrost Tunnel, located at Fox, near Fairbanks, Alaska. In all, some thirty cone penetrometer...

Wave Equation Modelling of the SPT
The stress wave propagation in the Standard Penetration Test (SPT) is described in this paper. It is shown that the SPT is a complex dynamic system and that both force and motion measurements...

Stabilization of Collapsible Alluvial Soil Using Dynamic Compaction
The effectiveness of dynamic compaction for improving collapsible soils was evaluated under field conditions using full scale load tests performed on 1.5 m square footings. Tests were...

Group Efficiency of Piles Driven Into Sands: A Simple Approach
A simplified analysis for computing group efficiency of circular displacement piles in sands is presented. Pile installation is assumed to cause soil displacements in the horizontal direction...

 

 

 

 

Return to search