Design Hydrographs in Coastal Wetland Watersheds
The use of synthetic unit-hydrographs for hydraulic design in ungaged watersheds has been an accepted practice for over 50 years. In southeastern U.S. coastal regions, which contain extremely...
Lag Relations for Semi-Arid Regions and Urban Areas
The use of synthetic unit hydrographs often requires the estimation of lag or other travel time parameters. Several procedures are available for estimating such unit hydrograph parameters....
Lessons from Hurricane Andrew's Effects on Hydraulic Structures
Documentation and description of Andrew's effects on open channels and other hydraulic structures in South Dade County, Florida, are presented, based on observations made during field...
A Computer System to Operate Coastal Structures
The Central and Southern Florida Flood Control Project (C&SF) was designed and built by the U.S. Army Corps of Engineers and is operated and maintained by the South Florida Water...
PMF Estimation for a Sparsely Gaged Watershed
This paper describes a procedure used to determine the design-basis and probable maximum flood (DBF and PMF) for Jiguey Dam located in the Dominican Republic. This dam is situated upstream...
Monongahela River Mapping & Flood Hazard Study
The study described here represents a unique collaboration and cost-sharing effort between two Federal agencies: the U.S. Army Corps of Engineers (USACE) and the Federal Emergency Management...
A Probabilistic Approach to Estimate Design Parameters for Flood Control Projects
The purpose of this paper is to provide engineering consultants with an improved method to estimate design parameters for various return periods in rural areas. The proposed method combines...
Additional Years of Record and Peak Discharge
The effect of additional years of stream gaging records is analyzed for stream gages in Nebraska. Frequency estimates are based on procedures outlined in Bulletin 17B, including skew coefficient...
Probabilistic Calculation of Design Floods?SPEED
The probabilistic calculation of design floods was initiated in the 60s to overcome statistical calculation uncertainties. SPEED takes up and expands this original concept in the form...
Stormwater Infiltration Design Based on Rainfall Statistics and Soil Hydraulics
When comparing stormwater infiltration with other methods for stormwater drainage an appropriate design procedure is necessary. The method proposed for future Danish guidelines is based...
Design and Analysis of an Irrigation Pond Using Urban Stormwater Runoff
Stormwater held in detention ponds can be reused for irrigation. A simulation of a mass balance on pond storage volume using rainfall and evaporation data for selected areas is presented...
Retrofitting a Detention Facility for Improved Quantity Control
Historically, detention facilities in the U.S. were first designed, constructed and operated for the single purpose of flood control. This led to a second phase, in which recreation and...
The Computer-Assisted Design of Multi-Ponds in Series for Stormwater Management
When a site's topography prohibits the installation of a single stormwater management pond, the drainage system can be integrated with multi-ponds in series. A computer program written...
Sacramento Drainage Manual?Hydrologic Procedures
For a period of over two years, HDR Engineering, Inc. (HDR) and HYDMET have been working with the City and County of Sacramento to develop a Drainage Manual. This Manual contains seven...
Sacramento Hydrologic Procedures Interim Adoption
In November 1989, the County and City of Sacramento jointly undertook the development of a manual for the design of drainage and flood control facilities in the region. Significant technical...
A Frost Protection Design for Fruit Trees in Southwest Colorado
The project explores the feasibility of producing commercial quantities of fruit in the high and arid environment of Southwestern Colorado by using low-volume water delivery systems for...
Computerized Irrigation Project Earthwork Design
A procedure was developed to perform earthwork optimization and land-leveling design for irrigation projects using aerial photogrammetry, a microcomputer and civil engineering computer...
Overland Flow Resistance Estimation from Small-Plot Data
The correct application of physical process models, such as the kinetic wave approximation to shallow overland flow, is dependent upon selection of appropriate values for parameters which...
Design and Management of Evaporation Ponds
The evaporation ponds in use in the San Joaquin Valley were designed and constructed to dispose of agricultural drainage water in a region of low soil permeability and high water table....
IRRICAD ? Computerized Irrigation Design
IRRICAD is a software program that helps irrigation designers by using a computerized systems approach to design. The program features drawing CAD input, interpolation of elevation data,...
Return to search