Locating and Sizing Air Release Valves on Irrigation Systems
This writing is directed to persons involved in irrigation systems and describes the usage of air release and vacuum valves. Principles described are applicable to many other piping systems,...
Simulation Model for Economic Irrigation Project Planning and Design
The principle design parameters considered are: water supply configurations (quantity, source and storage); shapes and sizes of the area to be served; on-farm irrigation techniques; cropping...
A Tale of Two Subjects: Modern Physics and River Mechanics
The Einsteins, father and son, made some of the greatest contributions to physics and to river mechanics, respectively. The modern phases of these two subjects are of roughly equal age....
Advances in Computational Mobile-Bed Hydraulics
A new conceptual approach to one-dimensional mobile-bed simulation is briefly described, along with two demonstrative examples. The approach is based on fully coupled solution of the unsteady...
Derivation of a Stability Principle from the Shields Criterion
The widely used specific energy equation, which defines the subcritical and supercritical states of the open channel flow, is a direct result of the integration of the Froude number corresponding...
Engineering Models for Coastal Sediment Transport
During the last ten years Danish Hydraulic Institute (DHI) has together with the Institute of Hydrodynamics and Hydraulic Engineering (ISVA) of the Technical University of Denmark been...
Using Sediment-Threshold Theories in Waves and Currents
Fundamentally different threshold-of-motion theories were applied to sand transport in two different coastal environments. Several recommendations for threshold application were reached....
Instability of Bed-Surface Composition Due to Sorting Process in a Stream Composed of Sand and Gravel
Wavy patterns of sorting are often observed in a stream composed of sand and gravel, and they are regarded as instability of bed-surface composition due to selective bed-load transport...
A Finite Element Application of Sand Terrace Formation Process
In this paper, the formation process of a sand terrace in front of river mouth is simulated numerically by means of the finite element method. The two-step explicit scheme is applied as...
Mid-Scale Laboratory Tests on a Two-Dimensional Movable-Bed Sand Model
A two-dimensional physical model was used to simulate wave-induced scour in front of a concrete dike sloped at 1:4. The tests were conducted at the U.S. Army Engineers Waterways Experiment...
Lessons from Ten Years Experience in 2D Sediment Modeling
The purpose of this paper is to share some of the lessons learned from the experience of the Hydraulics Lab Estuaries Division (WESHE) in applying two-dimensional (2D) numerical models...
Sediment Transport Modelling from Grain Size Data
Grain-size analysis can be useful in determining some of the hydrodynamic aspects of the evolution of a natural sand body. The suite statistics approach minimizes single-sample anomalies...
The Structure of Intermittent Sand Suspension Events Under Mild Wave Conditions
Nearshore sedimentation processes are being actively investigated through a series of research projects at the University of Miami. Quantitative measurements of waves, currents, and suspended...
Prediction of Time Development of Local Scour
The prediction of the time development of local scour is commonly solved by means of model tests. A brief description of the time-scale and the relation between the time and the scour...
Comparison of Models for Single-thread Streams
A variety of two- and three-dimensional models for flow in curved channels and rivers have recently been made available for engineering use, and the question arises as to how sophisticated...
The Computation of Total Sediment Transport in View of Changed Input Parameters
The sediment transport phenomenon is one of the most difficult fields in water research. Due to the numerous parameters and various interactions among them several theoretical-empirical...
Sediment Transport Rate for Non-uniform Sand
Based on the equations of bedload transport by authors, the functional relation of total sediment transport capacity of flow has been found. The modifying coefficient due to non-uniformity...
Sediment Transport Due to Channel Flushing
Blocking of rivers and canals by sediment due to landslides or dumping of waste create problems of upstream flooding and drainage. Experiments are carried out in the present study on flushing...
On Sediment Transport Modeling
Basic elements of a comprehensive water-sediment model are hydraulic, sediment, and morphologic computations. The stream tube approach and minimum energy dissipation rate theories are...
Criteria for a Sediment Data Set
The transport of sediment through a hydrologic system or basin is an extremely complex phenomenon. Many factors affect this movement. Criteria are established for an 'ultimate' or complete...
Return to search