Tuned Mass Dampers for Towers and Buildings
Tuned mass dampers (TMD's) are used to reduce the response of tall slender structures to resonant wind-induced oscillations. This paper reviews the authors' experience with the design...

Structural Design and Wind Resistance of Fukuoka Tower with T.M.D.
Fukuoka Tower, which was built in 1989, was projected as a monument, a observation tower and a broadcasting antenna with 234m high. In this tower, a Tuned Mass Damper(TMD) was set, in...

Long-Span Design for Seismic Forces?A Case Study of the Anaheim Arena
The design for the Anaheim Arena roof evolved in response to the strict requirements for a structure in a seismic zone 4 location. The support of the 329 ft. (100 m) by 444 ft. (135 m)...

Structural Response Using Stiffness Decoupler
The structural properties of a new stiffness decoupler developed by Hu, Kirmser and Swartz at Kansas State University, and its applications as an energy absorber and a device to isolate...

Steel Plate Energy Absorbers for Improved Earthquake Resistance
This paper discusses results of an combined experimental and analytical investigation on seismic response of frame structures using welded steel triangular plates as added damping and...

Earthquake Dampers Used for Seismic Retrofit of Building in San Francisco
For the first time ever in the United States, earthquake supplemental damping devices have been installed in a building in San Francisco. The devices used are Added Damping and Stiffness...

Passive Energy Dissipation Systems for Earthquake-Resistant Design
Passive energy dissipation devices, also known as supplemental damping devices, have been proposed as a means by which the earthquake resistance of a building can be substantially enhanced,...

Parametric Study of Structures with Added Viscoelastic Dampers
This paper presents the result of a parametric study on the seismic behavior of minimum weight-designed structures with and without added viscoelastic dampers. The structures are first...

Seismic Isolation Retrofit of the State of California Justice Building
The State of California Justice Building, located at 350 McAllister Street, San Francisco, is the first building to be selected by the State of California for retrofit using seismic (base)...

Evaluation of Seismic Isolation Schemes for a Historic Building
The U.S. Court of Appeals Ninth District building originally completed in 1905 with an expansion in 1933, suffered damage during the 1989 Loma Prieta earthquake. The building is currently...

Seismic Performance of Base-Isolated Building Structures
The theories and assumptions behind the base isolation technology are briefly described. As an illustration of its application, the base isolation of an existing 12-story hospital in Long...

Seismic Base Isolation Design for the San Bernardino County Medical Center Replacement Project
The SBCMC Replacement Project, located in Colton, California, consists of six separate building structures containing a total of approximately 86,000 m2...

Wind Hazards Reduction Program
The 1990's mark the International Decade for Natural Disaster Reduction. In this context, the Wind Effects Committee of the Structural Division strongly endorses the establishment of a...

Diagnosing Lateral Strength of Existing Concrete or Masonry Buildings
A research prospectus is presented for improving present methods of structural evaluation for concrete and masonry buildings. Specifically, the proposed research plan is limited to strength...

Development of Computer-Based Models of Standards and Attendant Knowledge-Base and Procedural Systems
Existing and new technology can be used to develop a new generation of standards that would allow designers to use complex standards efficiently, help standard-writing bodies to detect...

Investigation of Diaphragm Walls to Improve Performance, Design, and Construction
As a result of the need for tunnels, underground highways and parking structures, cofferdams, facilities related to the improvement of the environment, etc., there has been a significant...

Behavior of Horizontally Curved Steel Highway Bridges
Horizontally curved highway bridges represent up to 25 percent of the market for new steel-bridge construction each year. However, unanswered questions remain concerning the fundamental...

Bridge Management Research Needs
The present article deals with some aspects of bridge management of particular interest to bridge engineers and to bridge users at the moment. It addresses questions such as life-cycle...

Seismic Strengthening for Structures in Regions of Low Seismicity
Most existing structures were not designed to today's seismic codes and standards, and in fact in low seismicity regions codes did not require seismic design until recently....

Seismic Assessment and Renovation Study for Highway Bridges
This paper is concerned with hazards mitigation on highway bridges due to earthquake ground motions. Damage to transportation systems may occur if the acting faults of May-Shan and Tsu-Kou...

 

 

 

 

Return to search