Normal and Tangential Contact of Layered Spheres as Models of Joint Contact
The causes of cracking in degenerating cartilage are examined using analytical models of layered elastic spheres in normal and tangential contact. Vertical surface and deep radial cracks...
A Contact Problem Modeling the Squeeze-Film Mode of Synovial Joint Lubrication
A contact problem modeling synovial joint lubrication under squeeze-film conditions is studied. In this model, the thin synovial fluid layer is incompressible and linearly viscous, and...
Stochastic Seismic Response of Simple Structures
Since, at present, it is impossible to eliminate the various sources of uncertainty related to earthquake loading, it is necessary to better understand their effects on structural seismic...
Modelling of Tubes with Large Plastic Deformation
A thin circular tube laterally compressed between two rigid plates is investigated for its load(P)-displacement(?) behaviour. The moving hinge concept yields a good prediction compared...
R/C Columns Under Axial and Bi-Directional Lateral Loads
The reliability of a model, called a multi-spring model, was examined to simulate the observed response of reinforced concrete columns subjected to varying high axial loads and bi-directional...
Buckling Loads of Columns Made of Viscoelastic Materials
This is about the developing of relationships for predicting the change of buckling loads of columns made of viscoelastic materials under different loads. When a columnlike structural...
Using a Linearized Yield Surface in Dynamic Analysis
This paper describes an application of the finite element method to dynamic analysis of systems which exhibit material nonlinearity. A time history approach is used with a central difference...
Engineering Applications of the Analysis of a Spherical Shell
In a companion paper, a set of two integral equations have been established for a spherical shell under axisymmetric loads. This set of equations may be solved numerically by using Nystrom...
Curvature Effects on the Deflection and Vibration of Cross-Ply Shallow Shells
The use of high performance materials is becoming increasingly significant in structures subjected to severe loading conditions. Effects of curvature on the stiffness characteristics of...
Synthesis of Lateral Structural Bracing with Active Tendons
The idea of combining X bracing, viscoelastic dampers, and active tendons in a structure which has been optimized for gravity loads is presented. It is shown that reduction of the structure's...
Chaotic Analysis of Dynamic Bifurcation of Viscoelastic Shallow Arches
Periodic and chaotic motions in a mathematical model of an imperfect, viscoelastic shallow arch under a dynamic sinusoidal load for both the symmetric and the coupled unsymmetric responses...
Large Deflection of Simply Supported Inplane Loading Rectangular Plate Under Uniform Random Pressure
The procedure for obtaining an approximate solution for the mean-square deflection as well as maximum mean-square stress of geometrically nonlinear rectangular plate with arbitary power...
Elastic Stability of Non-Rectangular Plates
Non-rectangular plates may have infinite number of geometric configurations. Idealized pattern of practical shapes is chosen to be a sample for these plates. The present paper is concerned...
A Comparison of Modeling Techniques for the Buckling of Stiffened Shells
Different techniques are used to compute the collapse loads of a family of stiffened shells. Large differences are observed between the various predictions. Detailed numerical studies...
Localized Collapse of Shells of Revolution
A local-global methodology is presented to treat the problems of localized collapse of shells of revolution. The strategy consists of employing two dimensional general shell elements in...
Buckling of Frames with Load-Dependent Supports
The supports of frames may increase their rotational resistance as they are compressed. It is assumed here that this stiffening is a linear function of the load. Sway and nonsway buckling...
Methodology for Developing an Engineering Solution for Web Crippling
This paper describes the methodology used to develop an engineering solution for web crippling of aluminum trapezoidal sections. The development has two steps. The functional form for...
Ultimate Loads of Steel Frames with Imperfections
As for real structures, initial geometric imperfections are inevitable and may have a destabilizing effect on the structures. The present research deals with the study of this imperfections...
Computational Failure Analysis of Reinforced Concrete Plate Structures
The paper summarizes our recent effort in developing a suitable finite element code for the failure prediction of reinforced concrete structures. The basis of the development is a plasticity...
Safe-Load-Limit of Plates in Cylindrical Bending
The derivation of a closed-form expression for the viscoelastic critical load of long thin plates undergoing cylindrical bending and made of a linear time-dependent 'solid'-type...
Return to search