Regolith Dynamics
Due to the differences of the gravitational accelerations of the Earth and Lunar environments, geotechnical engineering must be applied differently in the two environments. This study...
Combustion Synthesis of Advanced Materials
The combustion synthesis of ceramic-metal composites using an in-situ liquid infiltration technique is described. The effect of varying the reactants and their stoichiometry to provide...
Mars Via the Moon?A Robust Lunar Resources-Based Architecture
A space operations architecture is outlined that uses lunar materials to cost-effectively support Lunar and Mars exploration and operations. This architecture uses a chemically powered...
Utilization of On-Site Resources for Regenerative Life Support Systems at a Lunar Outpost
Regenerative Life Support Systems (RLSS) will be required to regenerate air, water, and wastes, and to produce food for human consumption during long-duration stays on the Moon. It may...
Laboratory Evaluation of Footings for Lunar Telescopes
Presented here are the results of laboratory experiments with different footing shapes for lunar telescopes. These experiments used a variety of soils including some to simulate regolith...
Roof Management Alternatives for Aging Launch Infrastructure
This paper describes a Roof Management System approach to better cope with aging and deteriorating infrastructure support facilities at our national spaceports. It describes facility conditions...
Rocket Fuel to Earth Orbits from Near-Earth Asteroids and Comets
The analysis describes an architecture to bring 10,000 tons units of rocket fuel ore, propellant and construction mass back to low Earth orbit from newly discovered near-Earth comets or...
Metallized Microballoon EMI Shielding Materials
The number of applications requiring shielding against electro-magnetic interference (EMI) is growing. Materials that are lightweight, and formable need to be developed for shielding against...
Model Development for Operational Use to Help Spill Combating and Sea Rescue
Based on twenty years' experience on flow velocity measurements, transport experiments and numerical modeling the three-dimensional (3D) models of water currents, transport and water quality...
A Shell Approach to Modeling Oil Spill Trajectory and Fate and Search and Rescue Operations
A shell approach is employed to facilitate the application of an oil spill trajectory and fate and search and rescue model to a wide variety of geographic areas. In this strategy the model...
Fiber: Good For the Concrete Diet?
Fiber reinforcement of concrete has many advantages, but after thirty years of research those benefits have most often been seen in a laboratory. Some materials, such as synthetic fibers,...
Adding Up Admixtures
The importance of preventive maintenance and lifecycle costs has put added emphasis on concrete performance. For many specifiers, chemical admixtures, added to concrete at the batch plant,...
Apollo 11 Ilmenite Revisited
Various investigations have shown (1) that lunar regoliths are extremely complex materials, (2) that ilmenite is a minor component (8 to 10%) of high-Ti regoliths, and (3) that most of...
Housing?Economic Standard
House project with simplistic spatial concept (integrated system) in order to facilitate construction and further expansions with the same architectural design. The design allows for the...
Methodology for Evaluating Dredged Material Alternatives Using Risk-Cost Analysis Under Uncertainty
A methodology and a case example was presented at the 1989 Conference on Risk-Based Decision Making in Water Resources, Santa Barbara, to perform risk-cost analysis for dredged material...
Linearisation and Offshore Fatigue Reliability
In determining the force effects due to wave action on offshore structures it is conventional to use an equivalent linearisation to convert wave velocities to forces via Morison's equation....
Probability Model of Load Exceedances under Cyclic Loadings
A probability model for nonlinear load exceedances subjected to a Poisson process with reversible cyclic load pulses was developed and is presented in this paper. A reversible cyclic load...
Inspection Planning for Surface Fatigue Cracks
A reliability based method for planning of inspections to detect surface fatigue cracks is presented. Cracks are described as semi-elliptical surface cracks. The conditions governing fatigue...
Some Remarks on BK-Models for Fatigue Crack Growth
The choice of a model parameter for concentrating the entire uncertainties of a constant load amplitude fatigue crack growth process is shown to be sufficient when reproducing the first...
A Fatigue Reliability Model for Railway Bridges
A fatigue reliability model is described for safety evaluation of steel railway bridges. The model is a function of six independent random variables and can accommodate different types...
Return to search