Analysis of Scour Problems at Louisiana Bridges
An ongoing project to automate the monitoring of scour measurements at Louisiana bridge sites is discussed. The data at selected bridges is digitized and put into computer files for analysis....

Modification of Meander Pattern Using Wing Dams
A sharp river bend and a highway bridge together create potentially hazardous conditions for all down-bound barge tows on the Mississippi River at Lansing, Iowa. The tendency of the river...

Calibration of a Bridge Rating Formula for Overload Permits
This paper proposes a method to calibrate a reliability based load and resistance factor design (LRFD) permit evaluation formulation that will account for the overloaded truck's...

Multiple Presence Reduction Factors for Bridges
This paper reviews the multiple presence reduction factors specified in the AASHTO and Ontario codes, and provides a method by which these factors can be established in relation to volume...

Queensboro Bridge Inspection and Rehabilitation
An in-depth inspection of the Queensboro Bridge revealed deterioration of certain elements on the lower level of the main bridge. These elements include the outer roadway cantilever brackets,...

Development of a Double Tee Structural System for Highway Bridges
The fully precast, prestressed double tee beams are tied together by transverse post-tensioning through simple grout filled V-joints. The system provides for complete transversal continuity...

The Behavior of R/C Pinned Bridge Columns under Lateral Loading
Four one-eighth scale one-way hinge details of the type used in highway bridges were tested to study the effect of combined shear and flexure caused by lateral loads. The aspect ratio...

Development and Use of Stress Laminated Timber Deck Bridges
This presentation provides a brief overview of the concepts, development, research needs, economics and recent use of stress laminated timber bridge decks. Repeated articles on the serious...

Dynamic Behavior of Three J.S. Cable Stayed Bridges
Dynamic considerations in the design of three recently designed cable stayed bridges are discussed. The presentation includes analysis for eigenfrequencies and eigenmodes, assessment of...

Comparative WWind Tunnel Testing of Bridge Road Decks
A 1:75 scale full aeroelastic model of the Quincy Bridge over the Mississippi River was tested in the National Research Council of Canada 9 m multiplied by 9 m wind tunnel. Tests were...

Safety of Long Span Highway Bridges Based on Dynamic Response
This paper consists of an analytical study regarding the dynamic response of highway bridges subjected to heavy vehicle loads, with emphasis on long span low fundamental frequency bridges....

Top Projects of 1987
Five notable entries in the 1987 Outstanding Civil Engineering Achievement competition are summarized. The Keehi Interchange of the H-1 Freeway in Honolulu is only 1.9 miles long, but...

Fishing the Four-Lane
Recent changes in one Montana canyon have shown that even highways and freshwater fish can happily coexist with the proper planning. Twenty years ago, the Montana Department of Highways...

Freeway Analysis Using A Micro Version of FREQ
FREQ8PE is a freeway corridor simulation model. It is a batch processing mainframe program written in ASCII FORTRAN IV, which performs three basic functions: simulate freeway queueing,...

A Decision Support System for Freeway Corridor Analysis
When the scope of a particular corridor study dictates the review and analysis of a relatively large number of road segments along major transportation corridors, the integration of roadway...

Highway Accident Collision Diagrams on a Microcomputer
Collision diagrams of highway accidents are schematic exhibits that illustrate the location of each accident with respect to the highway geometric features. The types of accidents; such...

Highway Safety Analysis and Monitoring
The Highway Safety Analysis and Monitoring (HISAM) software was developed under a Federal Highway Administration research contract and is designed to aid local agencies with data base...

Transportation Network Building Using a CAD Interface
This paper illustrates how Barton-Aschman Associates, Inc, has made use of AutoCAD(TRADEMARK) on the microcomputer to digitize an existing highway network and to create a new network from...

NEDS?Network Editing and Display for TRANPLAN
This paper explores some of the current and possible future applications of interactive graphics packages to the tasks of analyzing and planning transportation systems. The source of the...

Applications of the General Network Editor
The General Network Editor is a graphical, data base manager for computer-aided design of transportation networks. Its principal use is for entering network data into the computer: drawing...

 

 

 

 

Return to search