The Ductile-Brittle Transition in Ice & Size Effect
This paper considers the ductile to brittle transition in ice under compression. Two criteria, one phenomenological and the other more physical, are presented for the transition strain...
Preliminary Results of Direct Tension Tests on First-Year Sea Ice Samples
We present the initial results of our tests to determine the tensile behavior of columnar sea ice over a range of temperatures extending from -20 to -3?C and strain rates of 10-5...
Fracture Resistance to Cracking in Ice: Initiation and Growth
The issue of notch sensitivity and brittleness of the test failure is used to forecast the necessary specimen size for a material property initiation toughness; a methodology is developed...
Laboratory Observations of Macroscopic Failure Modes in Freshwater Ice
A review is presented of tests performed in the laboratory by several investigators on indentation in freshwater ice. A number of the observed failure modes are discussed. From the results,...
Effective Pressures Measured During Indentation Tests in Freshwater Ice
Indentation tests were conducted by pushing flat, vertical indentors of two different widths (50 and 100 mm) against the edges of floating, freshwater ice at different velocities (0.6-150...
Wind Tunnel Modeling of Time-Dependent Drift Topography
The aeolian wind tunnel is a useful tool for investigating not only the saltation physics of wind-driven sand, soil or snow, but also for determining the time-dependent development of...
Snow Fence Operational and Material Testing
The proliferation of snow fence products since the late 1970's presents an opportunity for optimizing the control of drifting snow. It also presents a challenge in discriminating...
Recommended Cold Regions Meteorological Instrumentation
For nearly 30 years, CRREL has studied environmental conditions in winter weather. These efforts have concentrated on providing field-measured meteorological data and historical climatological...
Procedure for Seismic Evaluation and Design of Small Bore Piping
Simplified methods for the seismic design for small bore piping in nuclear power plants have been used for many years. Various pipe designers have developed unique methods to treat the...
Introduction to Structural and Mechanical Failure Modes for Nuclear Power Facilities
The three papers presented in this section discuss the types of information (i.e., dynamic tests, earthquake experience and analytical data) which are used in predicting the capacity of...
Containment Capacity and Failure Modes Beyond Design Basis Conditions
Analytical and experimental studies have shown that containments can at least sustain two to three times design pressures. Under the severe accident overpressure loading, experimental...
Stabilized Fly Ash Cover for a Municipal Waste Landfill
The study reported herein and several recently related projects have been aimed at reducing the hydraulic conductivity of fly ash and physiochemically fixing any potential leachable metals....
Leachate Flow from an Experimental Fly Ash Landfill
Combustion of coal in large-scale utility boilers produces an ash by-product which is often stored in open landfills. An experimental fly ash landfill was constructed by Pennsylvania Power...
Low-Rise Shear Wall Failure Modes
A summary of the data that are available concerning the structural response of low-rise shear walls is presented. These data will be used to address two failure modes associated with shear...
Failure Modes of Flat Bottom Vertical Storage Tanks
Flat bottom vertical storage tanks are important components in essential nuclear power plant safety systems. Data on the seismic capacity and failure modes of such tanks have been identified,...
Multiple Event Considerations for Postclosure Seismic Hazard Evaluations at Yucca Mountain, Nevada
Postclosure waste canister design requirements suggest the values used for seismic design have less than a 10% chance of being exceeded in a 1,000 year postclosure period. Considerably...
Weapons Test Seismic Investigations at Yucca Mountain
Yucca Mountain, located on and adjacent to the Nevada Test Site, is being characterized as part of an ongoing effort to identify a potential high-level nuclear waste repository. This site...
Migration Experiments at the Grimsel Test Site, Switzerland
The Grimsel Migration Experiment is a multidisciplinary study aimed at testing models of solute transport in fractured media, determining the degree to which laboratory results could be...
Assessment of Fracture-Sampling Techniques for Laboratory Tests on Core
As part of the site characterization work to be done at Yucca Mountain in Nye County, Nevada, a candidate site for the first mined-geologic repository for high-level nuclear waste, laboratory...
A Probe Method for Measuring In Situ Rock Thermophysical Properties
The application of a thermal probe method for in situ thermophysical property measurement is analyzed. The REKA method (Rapid Evaluation of k and alpha) involves a single-borehole probe...
Return to search