Riprap Stability on Channel Slide Slopes
The stability of riprap placed on a sloping bank is decreased because one component of gravity tends to displace the rock down the slope. Results of riprap stability tests on sloping banks...
Estimating Average Velocity in Cobble-Bed Channels
A data set obtained from natural channels having D//5//0 less than 64 mm and d/D//5//0 in the range of 3 to 20 is used as a basis for testing equations proposed by Limerinos, Thompson...
Air Regulated Siphons as Irrigation Canal Outlets
This paper investigates the possibility of using air regulated siphons as outlets from irrigation canals. Although a solution to a specific problem is sought, it is recognized that the...
Air Chamber Surge Tanks in High Head Hydro Plants
The U. S. Army Corps of Engineers Alaska District considered an air chamber during the design of the 'Crater Lake phase of the Snettisham Project near Juneau, Alaska. A conventional...
Open Channel Flow Resistance in Horseshoe Conduits
An experimental study of open channel flow resistance in horseshoe-shaped conduits is reported. The friction factor is shown to increase approximately 20 percent in comparison to values...
On the Definition of Fluid Mud
Fluid mud is a near-bed, high density cohesive sediment suspension layer which is a common cause of estuarial and nearshore sedimentation. It is noted that for a given sediment-fluid mixture,...
Laboratory Study of Mud Flows
In the study reported depth profiles and tip velocities were measured for a series of unsteady mud flows generated in a laboratory flume using a dam break scenario. Observation of a wide...
Update: Fluidization for Tidal Channel Maintenance
Flow emanating from perforations in a pipe under a non-cohesive media, such as sand in the coastal environment, can fluidize the overlying media. The fluidized sand can be readily moved...
Minimum Energy Loss and Velocity Profiles in Pipes
Minimum energy loss in a flow is discussed. The concept is applied to derive velocity distributions for laminar flow through a circular pipe and steady uniform turbulent flow through a...
Low Head Dam Safety Studied with Hydraulic Models
Use of physical models to study the hydraulic jump or submerged roller action created as water overflows low head dams provides an opportunity to develop design criteria for various structure...
Cellular-Automata for Hydrodynamic Modeling
A two-dimensional fluid continuum system can be modeled using a discrete field of particles that interact according to simple deterministic rules. The methodology is called Cellular Automata....
An Efficient, Accurate Technique for Navier-Stokes Solution
Solution of the Navier-Stokes equations for a Newtonian, incompressible fluid (such as water) requires both accuracy in the assuring conservation of mass and efficiency of convergence....
Gradation and Layer Thickness Effects on Riprap
Since riprap has become a costly and in some areas, scarce commodity, proper design maximizing the level of protection with a minimum rock size and layer thickness is an important goal....
Discharge and Depth Behind a Partially Breached Dam
The role that the velocity-distribution correction factor plays in the determination of the flood discharge and corresponding flow depth behind a partially breached dam is investigated....
Mechanics of Embankment Erosion During Overflow
Thousands of dams built in the United States have a potential to be overtopped by flood flows. It is necessary to understand the mechanics of embankment erosion in order to evaluate the...
Comparison of Some River Discharge Calculation Methods
To measure the discharge of a river, it is necessary to develop a stage-discharge curve based on water velocity at various cross sections of the river. This is the method which is used...
Low Head Hydropower Finite Element Analysis
Finite element analysis provides a means of predicting the flow conditions resulting from the operation of a proposed hydropower facility. The results of a finite element flow analysis...
Versatile Methodology for Flow Depth and Velocity Modeling in Stream Aquatic Habitat Assessment
The habitat assessment methodology developed by the IFG Instream Flow Group is a useful tool for evaluating instream flow needs. The methodology for basin flow modeling developed in this...
Roughness Coefficients of Large Floods
Most hydraulic calculations of flow in channels and overbank areas require an evaluation of flow resistance generally expressed as Manning's roughness coefficient, n. Literature...
Thermodynamic Factors in Evapotranspiration
Many of the methods discussed in this paper are refinements of procedures presented in the report 'Consumptive Use of Water and Irrigation Water Requirements'...
Return to search