Strength-Deformation Properties of Arctic Silt
Hydrocarbon exploration and production activities in the Beaufort Sea require construction of gravity structures capable of withstanding extremely large ice loads at sites where the subsea...
Undrained Cyclic Behaviour of Beaufort Sea Silt
Cyclic loading behaviour of Beaufort Sea silt has been studied under triaxial conditions, with and without static shear stress, to define the resistance to liquefaction or cyclic straining...
Constitutive Equations for Ice as a Damaging Material
Constitutive equations for ice subjected to uniaxial compression are developed based on applications of the theory of continuous damage mechanics. A physical model of ice deformation response...
Fracture Theory for Nonhomogeneous Brittle Materials with Application to Ice
Brittle heterogeneous materials generally fracture with a dispersed zone of microcracking at the fracture front. The deformation and failure of these materials can be described by a nonlocal...
Research Challenges in Frozen Ground Pile Design
A fairly recent pile design analysis is reviewed. The influence of such factors as temperature, salinity, loading, etc. on frozen ground pile design is pointed out. Since many facets of...
Structural Retrofit for Nuclear Power Plants
Retrofitting of nuclear power plants is a major concern these days. Recent rulings of regulatory agencies have affected most of the generating plants in some way. The lessons learned from...
Seismic Probabilistic Risk Assessment for Critical Facilities
Probabilistic Risk Assessment (PRA) for seismic events is currently being performed for nuclear power plants. The background on seismic PRA is presented along with a basic description...
Use of Rayleigh Waves in Liquefaction Studies
The Spectral-Analysis-of-Surface-Waves method is a new seismic method for efficient determination of shear wave velocity in situ. Vertical impacts applied to the ground surface are used...
Computer-Aided Studies of Complex Soil Moduli
Low-cost microcomputers and new electronic components make it possible to measure accurately the phase and amplitude of mechanical waves in the frequency domain at a small fraction of...
Relationships between Shear Wave Velocity and Depth of Overburden
Relationships between in-situ shear wave velocity and depth of overburden have been derived for various Quaternary age soils encountered primarily in Southern California. The geotechnical...
Snow Effects on Pile Design Temperatures
The construction of North Slope aboveground pipelines and gathering lines is generally from snow workpads constructed proximate to existing access roadways. The pile support centerline...
Case Histories: Evaluation of Drilled Pier Integrity by the Stress Wave Propagation Method
The Stress Wave Propagation Method (SWPM) was used to nondestructively investigate the integrity of straight-shaft drilled pier foundations at two sites in the Denver, Colorado area. Drilled...
Some Aspects of Analysis and Prediction of Subsidence
A procedure based on the nonlinear finite element analysis was investigated for the prediction of subsidence caused by longwall mining. This paper presents a case study involving predictions...
Application of Displacement of Discontinuity Methods in Underground Mine Design
Displacement discontinuity methods for stress analysis, pioneered by Starfield and Crouch (see, for example, Starfield and Crouch, 1972; Crouch, 1976; and Crouch and Starfield, 1983),...
Fracture Mechanics Analysis of Massive Hydraulic Fracturing Containment
The hydraulic fracturing containment problem is the subject of the present investigation. Unlike previous studies, the interface crack geometry with the correct crack tip singularity was...
Modelling of the Fracture Process Zone in Rock
There are a number of situations in the fracture mechanics of rock in which linear elastic fracture mechanics (LEFM) concepts are inapplicable or insufficient. Two such situations are...
Simulation of Rock Fracture with the 3-D SHALE Code
The 3-D SHALE code simulates the propagation of stress waves and the occurrence of fracture in brittle solids. The physical models and numerical methods in this code are similar to those...
Noise and Air Blast from Construction Blasting
Noise generated by construction blasting differs from other construction noise because of its frequency content. The audible high frequency portion is accompanied by a non audible, lower...
Can Clay Liners Work?
Nearly all liners for landfills and surface impoundments were constructed from compacted clay until about five years ago. But this is no longer so. In the past few years, clay liners used...
On the Design of Continuous Composite Beams
Methods of analysis and design of continuous composite beams are presented. Numerical analysis is used to determine the effective width of the slabs to be used in design. The influence...
Return to search