HOV Lessons
As traffic congestion worsens, transportation planners are struggling to squeeze out every last bit of available roadway capacity. High-occupancy vehicle lanes are one solution, but aren't...

Simplified Methods for Assessment of the Structural Integrity of Existing Steel Jacket Platforms in the Gulf of Mexico
This paper presents the results of research to define a practical procedure for assessment of the structural integrity of existing steel jacket platforms in the Gulf of Mexico. An overview...

Laboratory Observations of Macroscopic Failure Modes in Freshwater Ice
A review is presented of tests performed in the laboratory by several investigators on indentation in freshwater ice. A number of the observed failure modes are discussed. From the results,...

Containment Capacity and Failure Modes Beyond Design Basis Conditions
Analytical and experimental studies have shown that containments can at least sustain two to three times design pressures. Under the severe accident overpressure loading, experimental...

Low-Rise Shear Wall Failure Modes
A summary of the data that are available concerning the structural response of low-rise shear walls is presented. These data will be used to address two failure modes associated with shear...

Failure Modes of Flat Bottom Vertical Storage Tanks
Flat bottom vertical storage tanks are important components in essential nuclear power plant safety systems. Data on the seismic capacity and failure modes of such tanks have been identified,...

Axial Force-Moment Interaction in System Reliability
For rigid-plastic structures with random resistances and loads, a technique is presented that identifies critical failure modes considering the effect of axial force-moment interaction...

An Adaptive Importance Sampling Strategy
An adaptive importance sampling scheme is presented. The scheme updates both the estimate of system failure probability and the importance sampling density. The sampling density used is...

Failure Modes and Toughening Mechanisms in CMC
The paper reports results from stable flexural and tension tests conducted at room temperature on plain matrix and ceramic matrix composite (CMC) specimens. The flexural tests were conducted...

Bond Strength of Reinforcing Bars in SIFCON
This paper presents a brief summary of an ongoing investigation on the bond characteristics of deformed reinforcing bars embedded in a SIFCON matrix. A significant increase in bond strength,...

Simulation of Failure Processes in Cementitious Particle Composites
Progressive failure analysis in cementitious particle composites such as concrete requires a realistic description of the topology of the composite structure and the interaction of the...

Atlantic Salmon Smolt Movement and Behavior at Vernon Hydroelectric Station
Behavior of emigrating Atlantic salmon smolts (Salmo salar) was studied at New England Power Company's (NEP) Vernon Hydroelectric Station located on the Connecticut River,...

A Fleet Management System for Road Transportation
In this paper, an architecture for a fleet management system for road transportation companies is being proposed. This fleet management system integrates planning support with mobile communications...

Routing Based on Anticipated Travel Times
The routing of drivers based on anticipated as well as instantaneous link travel times has presented route guidance system developers with an opportunity to achieve additional IVHS benefits...

Bus Pre-Emption: A Real Time Control Strategy for Privatized Transit Operation
Bus pre-emption strategies are designed to provide priority to transit buses over passenger cars for urban travel. A comparative analysis of a proposed suburban bus service for regular...

Dynamic Estimation of Freeway Demand Patterns and a Stochastic Programming Approach to Freeway Ramp Metering
Controlling the rate at which vehicles are allowed to enter a freeway from the freeway's on-ramps has become a standard method for reducing the impact of both recurring and...

Safety Assessment of an Existing Concrete Gravity Dam
The safety and/or probability of failure of an existing 146 m high concrete gravity dam subjected to normal static and dynamic loads is evaluated. Three modes of failure were considered,...

Reliability of Elasto-Plastic Structural Systems
This paper proposes a method for generating safety margins and failure mode equations for elasto-plastic structures where interaction of load effects is taken into account. Structural...

Revised Failure-Conditioned Reliability Index
The authors have developed the failure-conditioned reliability index to estimate the probability of intersection of correlated normal variates. The index makes use of the mean and standard...

Random Instability of Elastic-Plastic Frames
A concept of joint probability of elastic and plastic instability modes was formerly given for single columns and now it is extended for framed systems. A critical load is defined for...

 

 

 

 

Return to search